Best Monoprice 6 Zone Home Audio Multizone Controller And Amplifier Kit, No Logo

Get the most out of your home audio system with high quality oxygen-free copper speaker wire from Monoprice!. This wire features two conductors made of high purity (greater than 99. 95% pure) oxygen-free copper. One side of the clear outer PVC jacket is marked with a blue stripe to indicate polarity.

Unity 100-Watt Bridgeable Power Amp

Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.

This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 50 watts per channel into 8-ohm loads or 65 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 120 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.

Features:
• Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads
• Bridgeable output provides 120 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connecting additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side

The mvr-100 is a rotary-type wall plate volume control for speaker systems with power ratings of up-inch 100 watts per channel and impedance ratings of 4-inch 16 ohms. This rotary control can be set-inch one of twelve positions including the minimum (off) and maximum volume settings. The wall plate mounts into a standard single-gang low-voltage wall bracket (not included) and has inputs and outputs for one pair of stereo speaker wires (4 input connections and 4 output connections). It can accept speaker wire in sizes from 14-inch 16 gauge and provides a frequency response range of 35 he-inch 20 kHz (+0/-2dB) at the full power rating of 100 watts per channel. Please note: this volume Control does not include a wall mounting bracket. Moonrise has everything you need-inch enhance your home theater system! You may also want-inch consider: low-voltage mounting brackets and wall-plate accessories in-wall speakers for a professional home theater looking-wall CL2 rated speaker wire

Drop ceiling speaker brackets for in-ceiling installation in commercial facilities with paneled ceilings.. For use with product ID 4104 (mst-870-2y). this product is not compatible with product ID 4929 (mst-825a).

Unity 200-Watt Bridgeable Power Amp

Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.

This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 100 watts per channel into 8-ohm loads or 125 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 225 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.

Features:
• Class-D amplifier providing 100 watts/channel (RMS) into 8 ohm loads or 125 watts/channel into 4-ohm loads
• Bridgeable output provides 225 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connection additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side

Get the most out of your home audio system with high quality, oxygen-free, pure bare copper speaker wire from monoprice!

this speaker wire features two conductors made of high purity (greater than 99.95% pure), oxygen-free bare copper. Pure bare copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire. Cca is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect The sound.

for the wire to have no audible effect, The total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using pure bare copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers.

for example, a 16AWG 2-conductor pure bare copper speaker wire has a total resistance of 0.803 ohms per 100 feet (both directions must be considered). by comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2-Ohms total. 20 feet of 16AWG pure bare copper would be 0.1606 ohms, well under the 0.2-Ohm limit. On the other hand, 20 feet of 16AWG CCA would be 0.2362 ohms, well over the 0.2-Ohm limit.

each conductor is jacketed with color-coded PVC for easy polarity identification. The entire cable assembly is jacketed in a white, CL2-rated PVC material. The CL2 rating indicates that the cable complies with fire safety and insurance requirements, making it safe for use inside the walls of residential class buildings.

In-wall speakers are great for everyday listening. They’re out of the way and don’t take up floor space. This Caliber Series sub features an Aramid Fiber driver made from materials similar to what is used in DuPont™ Kevlar® fiber products. This extremely durable material is ideal for speaker drivers due to its ability to hold shape under heavy stress. The result is high volume bass extension with minimal distortion caused by irregular oscillations found in other polymer type drivers. Immerse yourself in full-bodied, room-filling bass. With a 300 watt peak power rating, you can run this sub with our Unity series 200-watt Bridgeable Power Amp. The ‘Wife Acceptance Factor’ is increased even more with our paintable grill and easy to use paint guard. The in-wall sub can blend into any home décor or environment.

Easy Installation: The subwoofer includes easy-to-follow installation instructions. You can install it into almost any wall with at least 3.6″ of space behind the wall.

Aramid Fiber: The Aramid Fiber driver uses materials similar to what is used in DuPont™ Kevlar® fiber products. The sturdy construction holds its form better than polymers, which minimizes distortion.

300W Peak Power: The 300 watt peak power capacity means that you can fill your room with deep, earth-shattering bass.

Paintable Grill: The paintable grill allows you to match the color of your walls to make the speaker virtually invisible.