Best Home Audio Equalizer Rca Plugs

Product Description

Ultra-Compact 9-Band Graphic Equalizer with FBQ

Amazon.com

If we all lived in a perfect world, there would be no need for audio equalization. Sound systems would be perfect and would reproduce perfect signals in all their glorious perfection. Also, everyone in that perfect world would like the same amount of bass, midrange and high frequency, and there would be no such thing as feedback. But the world isn’t perfect, is it? Even the best sound system can benefit from the use of a good EQ–like the FBQ800.

Even the best sound system can benefit from the use of a good EQ. Click to enlarge.

1/4-inch and RCA inputs and outputs.

Nine steps of graphic EQ.

How Does it Work?
Imagine the frequency range of the sound you hear as a highway, a very wide one with nine lanes. Each of these “lanes” represents a single octave of the sonic spectrum. The first four lanes, labeled 63 – 500 (Hz) contain the really low frequency sound content, mainly bass, bass vocals, and the kick and tom drums. The three lanes labeled 1 k, 2 k and 4 k (Hz), make up the fundamental zone of most musical instruments and the male and female vocals. 8 k and 16 k cover the frequency range of cymbals, snare drums and higher pitched percussion instruments. The FBQ800 allows you to control the flow of audio traffic in each of these nine lanes. When properly applied, EQ makes it possible to hear all of these frequency ranges equally, thus the term equalization.

Feedback Elimination
When a specific frequency, or range of frequencies, reaches too high a level, feedback occurs–that all-too-familiar squeal or howl you get when the mic is too close to the speaker. Basically, feedback happens when there is so much of a particular frequency that it is picked up by the mic and run through the system again. That’s why feedback typically gets louder and louder the longer it’s allowed to occur. Needless to say, this kind of feedback is very undesirable.

This is where the FBQ800’s Feedback Detection System really works its magic. In this ingenious circuitry, LEDs on the individual faders light up when that frequency band is approaching the danger zone. All you need do is lower the illuminated slider until the LED blinks out–voilá, feedback problem solved! What once required a highly trained ear is now an activity that even a child can master.

Sonic Toolkit
That really is the best way to describe the FBQ800. With its nine frequency bands, you easily fine-tune your sound and instantly eliminate feedback. And each fader can be used to boost or cut the frequency range it controls by as much as 12 dB (and that’s a lot!).

Special attention is paid to the low frequency zone. In addition to low frequency faders, the FBQ800 features a Low Cut filter for removing unwanted low frequencies such as fl oor rumble, room resonance, electrical hum, etc. This is especially handy if your system is being used for speech rather than music.

To Boost or to Cut, That is the Question
Raising and lowering specific frequency bands can improve the frequency response of any room’s acoustics. For instance, if the room you’re in is “bass-heavy,” lowering the 63 and 125 Hz faders can help eliminate an overall “boomy” or “muddy” sound. Likewise, gently boosting the 8 and 16 k sliders can add sparkle to a somewhat “dark” mix. Are the vocals getting lost in the mix? Raising the level of the 1 k slider can help bring them out.

It’s important to note that raising a single fader level is not always the best solution; it’s often better to lower the bands surrounding the frequency you want to bring out, and then boost the overall volume level to achieve better headroom.

Built for Accuracy and Reliability
Speaking of headroom, FBQ800’s 6-digit LED Input/Output meters and level control are provided for precise level maintenance. Longterm reliability is ensured, thanks to high-quality illuminated faders and switches, and our ultra low-noise audio operational amplifiers provide outstanding sonic performance. In addition, all Mini Series components may be stacked to create an ultracompact signal processing solution.

What’s in the Box
Behringer FBQ800 Ultra-Compact 9-Band Graphic Equalizer, Power Supply, User’s Manual

The HTTX Gold-Plated 3.5mm to 2 x RCA Cable is an indispensable accessory for connecting most portable smart devices with the common 3.5mm audio connector to a TV, AV receiver, audio amplifier, or radio with RCA white/left and red/right sockets. This bi-directional cable is also useful for connecting an older DVD player to a computer or speaker with a 3.5mm ‘Line-In’ port for recording or listening.

Premium Construction with an Unbeatable Warranty
Gold-plated connectors, bare copper conductors, and ferrite bead shielding combine together to provide superior stereo audio transmission and protect against RFI and EMI. The beveled, step-down design of the 3.5mm connector provides a secure connection even with a smartphone in a case. It comes with a lifetime warranty and product support.

Important Note
This cable only transmits audio. It is not a component video cable.

Cable Specifications
– Connector 1: 3.5mm Stereo Jack Male
– Connector 2: 2 x RCA Male

Mediabridge RCA stereo cable with left & right audio ideal for connecting audio components like DVD/blu-ray players, speakers, amplifiers, game consoles, TV’s & sound systems. This cable neatly bundles 2 RCA connectors on each end for left & right stereo audio, resulting in a clearer sound from your audio components. It’s built with high-quality materials for durability & signal strength, like corrosion-resistant gold-plated connectors. That way, a crisp sound is maintained & static isn’t an issue. The cable is finished with gripped Color-coded molds, making installation & cable handling simple. Product Features – ideal for connecting audio components, like DVD/blu-ray players, speakers, amplifiers, game consoles, TV’s & sound systems – this cable neatly bundles 2 RCA connectors on each end for left & right stereo audio, resulting in a clearer sound from your components – built with corrosion-resistant gold-plated RCA connectors for maximum signal strength & minimal static – finished with gripped Color-coded molds for easy installation compatibility devices with left & right RCA audio interfaces, including DVD/blu-ray players, game consoles, TV’s & more installation plug-&-play: ready to use, once each end is connected to its respective port on a compatible unit notes each end of the cable contains 2 RCA connectors, for left & right audio

This ground loop signal isolator eliminates ground loop noise from Radio pre-amp outputs and DC current from RCA cables.

Devinal Professional XLR to dual RCA Male cable, 3 meters (10 Feet)

Features:
These XLR to dual RCA Y Splitter Cables can be used in both directions and have a variety of uses. Connect line outputs from mixing consoles, microphones, to recorders and amplifiers, connect DJ controllers to amplifiers, convert an XLR cable into a long RCA cable, even integrate home theater equipment with your Pro Audio gear…Anywhere you need to adapt from an XLR to RCA connection. This Y splitter cable produces high quality sound without unwanted noise. This is an unbalanced cable.

Application:
Connecting DJ Controllers to Amplifiers – Converting an XLR cable into a long RCA cable – Integrating Home theater and Pro Audio gear. Suitable for splitting or combining audio signals,

Specification:
Connector: Gold-plated Housing baking finish XLR Male plug x 1;
Connector: Gold-plated Housing baking finish RCA Male plug x 2;
Braid Shielding: double shielding 98.5% Coverage;
Jacket Material: Environment-friendly Flexible PVC design by italy;
Gauge: 23 AWG oxygen free copper;
Outside Diameter: 6.0mm
Cable Length: 10 FT (3m)

package:
XLR Male to Dual RCA Y Splitter Patch Cable * 1pcs
Devinal Cable tie * 1pcs

SERVICE:one year warranty and lifetime service support

Note:
1.Unbalanced Connection -This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter.
2.If your input device is red and white, use black instead of white.