Best Home Audio Bluetooth Speaker Building Components

Quimat have modified the TDA7492P audio receiver digital amplifier board that will be more convenient for users to operate the board.The key of the operation stability of the board are the input voltage and heating problems,so Quimat added the heat sinks to enhance heat dissipation which help the users to avoid the board burned by the high temperature.

Specification:
Power:2.1 interface 8-25V DC power supply
Audio input: stereo input various versions of the Bluetooth connection, using high-quality Bluetooth chip,Bluetooth V4.0,high software compatibility
Output Impedance:8 ohms Best(4,6,8,16 ohm impedance can drive speakers)
Output Power:powered 25V,6-ohm impedance output 2 X 50W,8 ohm impedance output 2 X 40W dual-channel

If you directly use Bluetooth,when power,wait 3s-10s,until LED Blue and Red light flashing alternately,then you can use your device to find my Bluetooth module,then connect it,can directly use it.

Parameter
Material:PCB
Digital Amplifier Board:3.2*2.0*0.7 inches(L*W*H)
Protective Case:4.0*2.7*1.0 inches(L*W*H)
Net Weight:0.2 pounds

Package Includes:
1 x Quimat Hifi Mini Bluetooth Digital Amplifier Board with 3 bit 0.36 “heat sink
1 x Protective Case with A full set of screws, studs and magnetic pads
1 x 2.1mm x 5.5mm Male Connector

The powerful Braven Balance speaker is designed with the active individual in mind. Available in sporty color options, the Braven Balance delivers room-filling sound to enhance your active, on-the-go lifestyle.

The Pyle In-Wall/Ceiling Bluetooth Speaker Kit delivers effortless stereo sound to any room in your home or office. The included Bluetooth controller allows for wireless music streaming ability and doubles as a sound processing digital amplifier. You will be able to stream audio from all of your favorite Bluetooth devices (like smartphones, tablets and computers). Each round-style speaker features a high-compliance polymer tweeter that delivers full, rich sound without cluttering floor space. They are made of environmental friendly ABS material and include a cut-out template for easy installation. Mount them in a convenient location on the wall or ceiling for a flush, clean look. Achieve wide-range sound performance and add audio to any room with the Pyle In-Wall/Ceiling Bluetooth Speaker Kit.

Features:

* Includes (2) 5.25’’ -inch Speakers
* In-Wall / In-Ceiling System
* Built-in Bluetooth for Wireless Music Streaming
* Quick Connect Spring-Loaded Speaker Terminals
* 1/2’’ High Compliance Polymer Tweeter
* Polypropylene Cone with Rubber Edge
* Mounts Flush to Walls or Ceilings
* Cut-Out Size Template for Easy Installation
* Environmental Friendly ABS Construction
* Perfect for Custom Installations & Applications

Bluetooth Connectivity:

* Includes Bluetooth Wireless Audio Control Receiver
* Works with All of Today’s Latest Devices (Smartphone, Tablet, Laptop, Computer, etc.)
* Bluetooth Network Name: ‘Pyle’
* Bluetooth Network Password: ‘0000’ (4 Zeroes)
* Bluetooth Version: 4.0
* Wireless Range: 30’+ ft.

What’s in the Box:

* (2) 5.25’’ Speakers
* Speaker Connection Wire
* Bluetooth Control Receiver
* Power Supply

Technical Specs:

* MAX Power Output: 150 Watt
* Impedance: 8 Ohm
* Sensitivity: 88 dB
* Frequency Response: 80Hz-20kHz
* Power: 100/240V (12V DC Power Supply)
* Total Unit Dimensions (Diameter x Depth): 8.0’’ x 3.0’’
* Cutout Diameter: 6.5’’, Cutout Mounting Depth: 2.6’’
* Single Speaker Weight: 2.33 lbs.
* Sold as: Pair
* Weight: 5.23 lbs.

—— SATISFACTION GUARANTEED ——

Your satisfaction is our #1 priority. If this item fails to meet your expectations we will accept it back a full refund within the first 30 days. We also stand behind this product with a limited 1-Year manufacturer warranty. Contact us if the item should show any defect within the first year we will help exchange it for a new one.

The OSD Audio Commercial 70V In-Ceiling Speakers offer great sound quality, making these speakers great for installation throughout all commercial buildings.

Optimal Speaker Design is engaged in the design, engineering, and distribution of high-quality home and commercial audio products. Our products range in complexity from simple in-ceiling speakers to whole house audio systems—all with beautiful styling and high-end sound quality.

Our U.S.-based research, development and design team, is supported by a network of cutting-edge acoustical, mechanical and electrical engineers. Together, we create products that combine the latest technology with ease of use for a quality sound experience.

With extensive product and application knowledge, our exceptional team provides you with custom solutions to create the perfect audio solution.

Now Hear This!

The KINTER SMA40BT is one of THE least expensive mini amplifiers packed with so many features. The 2 x 25 Watts has plenty of power for most home or commercial audio speakers. Ample inputs, including RCA L/R, 3.5mm AUX, USB, and TF card inputs. We even built an FM tuner into it for background music and over music paging ability-perfect for light commercial applications such as retail stores, events, or anytime you need to lift your voice above a crowd. 

Beats Higher Priced Models

Load up your music and the SMA40BT becomes the most affordable Karaoke amplifier around! Built-in Bluetooth technology allows you to instantly stream wireless audio from your favorite devices — quickly and easily. Plug in a 1/4″ microphone and use the amplifier for PA applications or mix in your favorite music for a night of Karoake. 

But Wait…There’s More!

Separate Bass and Treble allow you to customize the sound to your liking and a pocket-sized remote lets you control the unit from across the room. Active Left and Right Channel LED output level indicators. Power is built-in, simply wire up your speakers, plug it in, select your input and away you go. Just in case you want to run for political office someday, we’ve included a 12VDC input so you can dress up your car or truck with signs and move the SMA40BT outside as a portable PA amplifier to garner votes. We know the SMA40BT isn’t big and fancy, and it might lack some of the frills found in more expensive amplifiers, but the goal of offering one of the lowest priced amplifiers with the most popular features has been met in the SMA40BT.  Don’t ask why,  just give it a try!

Full specifications can be found in the Important Information section below

Acoustic Audio’s Audiophile Series powered subs immerse you in the action of your fast-paced movies and sports. Add impact to your favorite movies and full-bodied bass to your favorite tunes with a sub that’s barely a cubic foot. Its stylish design and superior sound make it a smart addition to any home theater. Its elegant black ash finish is refined and complements most flat-panel displays. It features a high-current, 300-watt amp which effortlessly drives its down-firing 8″ woofer for dynamic low-frequency effects. The high and low inputs let you use any receiver or processor. The 8″ woofer utilizes a long excursion cone for deep, accurate response. The MDF bass-reflex enclosure features internal bracing, and a 26Hz to 250Hz frequency response delivers thumping bass from all your action movies and CD albums.

Product Description

Pro monitor 800 satellite speaker

From the Manufacturer

The ProMonitor 800 is Definitive’s mid-sized satellite speaker in the acclaimed Pro Series. Four ProMonitor 800s along with a ProCenter 1000 and ProSub 800 makes a complete ProCinema 800 system. All the components of the system are packed and sold separately allowing you to mix and match Pro Series components to build the system that best suits your needs.

Small size speaker has remarkable sophistication and huge sound

Easy to place with the built-in keyhole mount. View larger

Bass radiators enhance low frequency performance for more true-to-life sound

Rubber-tipped tripod stand ensures slip and mark-free shelf mounting

Don’t let the ProMonitor 800’s small size and affordable price fool you — it is a remarkably sophisticated product with huge sound. The 800 incorporates many of the same technologies as Definitive’s top-of-the-line models including BDSS drivers, pure aluminum dome tweeters, and planar pressure coupled mid/bass radiators for home theater sound quality that will shock your friends and family when they hear your system for the first time.

The Secret to Their Big Sound

Competing satellite speakers of this size usually have weak lower-midrange response; that part of the audio range that contains the “warmth” and “body” of voices and musical instruments. Listen to a male vocal on typical small satellite speakers and you will instantly hear the weakness in the lower midrange. The ProMonitor satellites avoid this critical problem by pressure-coupling exclusive BDSS technology driver to an equal-sized mid/bass radiator cleverly placed on the top of the satellite. This technique doubles the lower-midrange radiating area of the speaker without increasing the size of the enclosure. You’ll enjoy the kind of rich, warm and life-like sound quality that you thought was only possible with big, hard to place speakers.

Easy to Place, Easy to Use

Small enough to disappear in a room but beautiful when in plain view the 800 satellites can be shelf-mounted with their unique tri-lobed base, wall-mounted using the built-in keyhole mount or optional ProMount 80 articulating pivot mounts, or stand mounted with their optional ProStand 600/800 floor stands (sold separately).

The Sound

Sonically, the ProMonitor 800 satellite is a revelation in terms of achieving incredible sound at an affordable price. Their imaging is absolutely boxless, spacious and three dimensional while delivering pinpoint specificity and localization when called for. They are velvety smooth with you-are-there presence which is hard to find at any price and unheard of in this price range. The 800 is dynamic but capable of great subtlety so it excels equally with music or movies.

Technical Specifications

Dimensions: 4.75 by 8.38 by 5 inches (W x H x D) Frequency response: 57 Hz to 30 kHz Recommended amplification: 10 to 150 watts Efficiency: 89 dB Driver complement: 1 x 4.5″ bass/midrange driver; 1 x 4.5″ planar low-frequency radiator; 1 x 1″ aluminum dome tweeter Magnetic shielding: Yes Finish: Gloss black

This 40 watt power amplifier provides the juice you need for your 25 V or 70 V PA speaker. The three 1/4” jack inputs are conveniently located on the front – two mic inputs and one auxiliary input. Mic 1 has an auto-talk over, so you can easily cancel the other inputs. Each input has an independent gain control, and you can also adjust the tone of the sound using the rotary treble and bass faders. Connect your speakers using the rear terminals. Includes a replaceable fuse and detachable AC power input. Runs on 110 or 220 V.

M3600D with advanced digital audio technology, built-in high efficiency class D digital amplifier, total 200W RMS.