Best Home Subwoofer Amplifier Dayton

PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.

Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!

Parameters:

• Audio input: 3.5mm
• Audio output: Banana plug
• Power supply: DC 8-25V; at least 3A
• Maximum power: 100W
• Chip: TPA3116D2 + NE5532
• Weight: 0.35Kg; 0.2Kg (without package)
• Dimensions: 68.5 * 33 * 90 mm (not including terminals)

Packing List:

• 1 * amplifier

This Theater Solutions by Goldwood powered floor subwoofer is newly designed for consumers who demand extra powerful bass for their home theater experience. High quality, lush bass and a full bodied sound at an affordable price. This speaker is perfect playing movies or mega bass rap music. Made with only the highest quality, moisture resistant materials to deliver unsurpassed sound in any listening environment. Sophisticated design and measurement equipment, including computer assisted design software were used to design this powered subwoofer to achieve an optimized balance and interface between components to give better quality performance and longer life. This slim versatile sub comes with stands to set up in any area, a mounting bracket to attach to a wall or the slim 4 3/4″ height can slide under most furniture. The specially built in cabinet amplifier has high level left/right spring terminal inputs. The 24dB per octave crossover is continuously variable from 50-150Hz. This powered sub also has a built-in auto shut off. If two minutes goes by and sub does not receive a signal it switches to stand-by mode to conserve power. Volume and crossover frequency dials round out the special features on this super powerful subwoofer. The 8 inch long throw bass woofer has a frequency response of 35-150 Hz +/- 2dB. The port design smooth’s air flowing in and out of the cabinet, reducing turbulence and port noise. The ports also increase linearity, lowers distortion, reduces 5th order harmonic distortion and provides an increased output as high as 2-3dB. A black wood finish, cabinet feet, 115 AC cord, included RCA cables, RCA “Y” adapter, stand mounts and hanging mount with mounting screws round out this subwoofers fantastic details.

Quick tips:

1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.

Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.

Parameter:

1. Power supply range: 12v-24v;

2. THD: ≤ 0.04%;

3. Frequency Range: 20Hz – 120Hz (±1 dB);

4. SNR: ≥ 98dB;

5. Input sensitivity: ≤ 280mV;

6. Terminating impedance: 2Ohm – 8Ohm;

7. Output power: 100W for Subwoofer;

8. Input mode: 3.5mm audio input;

9. Power supply: 19V 4.74A 90W;

10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.

Experience the vibrancy of our home sound system. A great sound system relies on a great amplifier–they’re an integral element to a full soundscape. Create a multi-room audio environment, build a home theater, or expand your system to the outdoors. Our gold standard Class A amplifiers will fit your every need. This Power (A) AMP100VS system has 2 channels rated at a power output of 50 watts into 8 ohms. It has a power output of 60 watts RMS per channel into 4 ohms. 150 watts are bridged to an output at 8 omhs. Born out of Portland, Oregon, AudioSource began designing and manufacturing high-grade, affordable, and great sounding audio products in 1978. Our goal is to exceed your expectations for value and performance. Specifications: Input Sensitivity: Variable, .7 Vrms for rated power at 8 ohms. Frequence response: 10Hz to 30kHz. Channel Crosstalk: 70 dB. Less than 0.2% THD into 8 ohms at rated power. S/N Ratio: 100 dB A-weighted.

AD 18 is a small full digital class d bluetooth amplifier built-in headphone amplifier supports subwoofer output.Connect it to your computer and use it to drive your headphones with an amplifier or to power your passive speakers(4ohm speaker produces 80Wx2 output power).Sophisticated matting aluminum housing reduces interference. Patented SDB sound and +-8 level treble and bass adjustment. Independent headphone amplifier design and advanced DSP technology makes the unit more desirable. Amplifier Chip: Using TAS5508C for digital signal DSP processing and Pre-Amp.TAS5342A for digital signal rear-AMP. It will be through LC filter and then send to amplifier output jack. Digital Receiving Chip:CS8422.It receive optical and coaxial signal and all signal transfer. USB chip:TAS1020B. Supports stereo sound 24bit/96kHz.For much better sound, we use SDPI output instead of internal DAC output design. Strong anti-interference ability and More High-Fidelity. HP Amplifier Chip:MAX97220A. Dual-OP amplifier:NE5532 with High efficiency low noise. Analog/Digital converter IC :CS5341,Accurate to 24 bit 48kHz.Convert AUX signal to digital signal. Then digital signal processing by CS8422 Specification Type: Full digital decoding amplifier Input port: USB/AUX/3.5mm Coaxial and Optical 1/Bluetooth/Optical 2 Output Port: Amplifier output port/3.5mm Headphone port/Subwoofer Voltage: 24V Output power:80W x 2 SNR(Signal to Noise): 90dB THD+N: 0.04% Power consumption: 50W Standby power:0.8w EQ adjustment: 7 Headphone output(32ohm): 53mW@THD=0.04% USB sampling rate: 24bit 96kHz Optical sampling rate:44.1kHz-192kHz Coaxial sampling rate:44.1kHz-192kHz Treble adjustment range: ±8db,Bass adjustment range:±8db Net Weight: 572g Gross Weight:1585g Machine Size: 172*51*85mm