Top 10 Bench Dog Router Lift

Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups

The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3⁄8″ x 91⁄4″ x 113⁄4″ plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router models—without the need adapters or modifications—in a high-performance carriage that you raise and lower from above the table.

With the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.

Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1⁄16″, though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts.

Whether you’re upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.

Product description

 JessEm’s Mast-R-Lift II is your one-stop solution for your fixed base router lifting needs!  Not only does this router lift give you above-the-table access to your router to make adjustments and bit changes easy and convenient (no more bent wrenches!), it is designed to accommodate most fixed base routers currently on the market.  JessEm’s high standards of manufacturing are present in the Mast-R-Lift II 02121.  It features a smaller 8-1/4 in. x 11-3/4 in. top plate mounted on steel spindles containing 5 double sealed bearings, ensuring smooth operation on the spindles with even the heaviest of routers.  It also includes JessEm’s patented tensioning mechanism on the threaded spindle to remove backlash and vibration, and to prevent setting changes while routing.  But with the Mast-R-Lift II, JessEm goes one step further:  it features a dedicated locking mechanism for heavy duty, long term routing operations.  Now you can work with confidence, knowing your router will not shift out of position!  The shafts on the Mast-R-Lift II are pressed into the shaft mount with hydraulic pressure, not just threaded to the top plate, providing a rigid and durable mount that will withstand the toughest routing operations.  In addition, the top plate is hard anodized, giving a thick coating that is resistant to abrasion and will last for years to come!  The Mast-R-Lift II includes all mounting hardware, 1 starter pin, 2 hex keys, 1 crank handle, 3 insert rings (1-3/8 in., 2 in., and 2-1/2 in.), and 1 insert wrench, and is compatible with the following routers:  Porter Cable 690/890/7518, Bosch 1617/1618, DeWalt 610/616/618, Craftsman 17543/17540/28190, Makita 1101, Hitachi M12VC,/KM12VC, Milwaukee 5626/5615/5616/5619, Rigid R29302.  The Mast-R-Lift II 02121 is designed to fit non-JessEm router tables with the smaller 8-1/4 in. x 11-3/4 in. opening.  

From the Manufacturer

JessEm sets pretty high standards when we develop a new tool. The New Mast-R-Lift II adheres to those strong principles. The Mast-R-Lift II has 5 double sealed bearings, providing a lifetime of use even with the heaviest of routers. All of JessEm’s lifts have the patented feature of adding tension to the threaded spindle to remove backlash, vibration, and preventing setting changes while routing. JessEm went one step further with the Mast-R-Lift II. A new dedicated locking mechanism for heavy duty, long term routing operations was added, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks on the Mast-R-Lift II enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This process is several times more expensive but we want the Mast-R-Lift II to provide many years of service. Hard anodizing is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II, like all of JessEm’s Lifts are pressed into a shaft mount with hydraulic pressure. We don’t just thread our shafts to the top plate. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than just one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. The Mast-R-Lift II provides for above the table bit changes for all routers without the need for bent wrenches. All the machined components are machined on one of our CNC machining centers in Barrie, Ontario Canada, and all the aluminum non wear components are anodized for appearance, corrosion resistance and some wear resistance. Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch for Non-Jessem Tops

Product description

The new Mast-R-Lift II from JessEm Tool sets a higher standard by which router lifts will now be judged. Ball-bearing construction and a new cam lock feature are part of a new design that you now can use with more than one router. The new Mast-R-Lift II fits most fixed base router motors on the market right out of the box.

From the Manufacturer

JessEm sets pretty high standards when we develop a new tool. The New Mast-R-Lift II adheres to those strong principles. The Mast-R-Lift II has 5 double sealed bearings, providing a lifetime of use even with the heaviest of routers. All of JessEm’s lifts have the patented feature of adding tension to the threaded spindle to remove backlash, vibration, and preventing setting changes while routing. JessEm went one step further with the Mast-R-Lift II. A new dedicated locking mechanism for heavy duty, long term routing operations was added, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks on the Mast-R-Lift II enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This process is several times more expensive but we want the Mast-R-Lift II to provide many years of service. Hard anodizing is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II, like all of JessEm’s Lifts are pressed into a shaft mount with hydraulic pressure. We don’t just thread our shafts to the top plate. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than just one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. The Mast-R-Lift II provides for above the table bit changes for all routers without the need for bent wrenches. All the machined components are machined on one of our CNC machining centers in Barrie, Ontario Canada, and all the aluminum non wear components are anodized for appearance, corrosion resistance and some wear resistance.

Product description

Bosch RA1165 Undertable Base for 1617/18 Series Routers (replaces RA1164)Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch RA1165 Undertable Base for 1617/18 Series Routers (replaces RA1164) Features: Undertable Router Base with Above-Table Wrench Access Router Attachments, Medium & Large Routers Designed for router table usage Wrench access from above table for convenient depth adjustment Base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern. Hardware included. Wide 3-3/4 Inch base opening allows use of larger bits Motor housing does not rotate during depth adjustment, eliminating potential cause of horizontal movement of bit Tool-free base change Quick clamp system allows motor to be moved with ease Two additional protective devices prevent motor from falling to floor after quick-clamp is released. Part Number RA1165 Used on Model No. 1617 / 1618 series routers and motors; RA1171, RA1180, RA1181, RA1182, RA1200 Router Tables Sales Pack Quantity 1 Screw Head Size 4-Hole Pattern: 4M, 3-Hole Pattern: 10-24 Category Routers

Amazon.com

The RA1165 under-table base is based on the durable Bosch fixed base but enhanced with an above-table bit height adjustment mechanism. The RA1165 under-table base can be mounted to virtually any table surface and common router table plates.

The Mast-R-Lift II has 5 double sealed bearings. The lift adds tension to the threaded spindle to remove backlash and vibration, and prevent setting changes while routing. Includes a dedicated locking mechanism for heavy duty, long term routing operations, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II are pressed into a shaft mount with hydraulic pressure, not just threaded to the top plate. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than just one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. The Mast-R-Lift II provides for above the table bit changes for all routers without the need for bent wrenches. All the machined components are machined on one of our CNC machining centers in Barrie, Ontario Canada, and all the aluminum non wear components are anodized for appearance, corrosion resistance and some wear resistance. Mast-R-Lift II includes 1 insert wrench, 1 starter pin, 2 hex keys, 10 leveling screws, and 1 crank handle, plus three (3) insert rings: 2″, 2-1/2″, and 1-3/8″. JessEm’s all new 10 Piece insert ring set includes: Blank, 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1-1/4″,1-1/2″, 1-3/4″ and 2-1/4″. All rings feature JessEm’s standard Tab-Lock design. The convenient storage caddy will hold 14 rings. A total of thirteen (13) rings are included in this complete package.

Kreg’s freshly redesigned Precision Bench top Router Table (new item# PRS2100) now offers even more features that give it the capability of a full-size, industrial router table in a portable package. More than ever before, this makes the Precision Bench top Router Table a perfect routing solution, whether they want a router table to use on a job site or compact router table to use in the shop. You will notice the all-new router insert plate right away. It measures 9-1/4″ x 11-3/4″ x 3/8″ to support even the biggest routers and it features Kreg’s new Level-Loc Reducing Rings. These rings simply twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1″, 1-3/16″ (for use with Porter-Cable style guide bushings) and 2-5/8″. More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router and it comes with a set of Kreg’s Precision Insert Levelers. The redesigned Precision Bench top Router Table also features Kreg’s upgraded industrial-quality fence. It features all-new cam clamps that allow you to adjust the fence quickly and easily and lock it in place securely. Like before, the fence is made from anodized aluminum, has adjustable sliding faces and works as a vertical jointer. To make routing even easier, the Precision Bench top Router Table has a large 16″ x 24″ table that’s made from thick MDF to dampen vibration. The table offers the same durable Easy-Slide skin as Kreg’s full-size router tables and has a miter gauge slot. That table is supported by a heavy-duty steel stand that has a wide stance for extra support, plus thick rubber feet to dampen vibration. The open design helps reduce router noise and the base has predrilled holes that allow it to be enclosed if desired.

Package contains: 1x Laboratory lifting platform.
Ideal for supporting or elevating differnt objects in the lab, like beakers, flasks, water baths, stirrer etc.
Fitted with oversized knob for easy adjustment.
Measurements:
Laboratory Jack Aluminum Base and Top Plate both 6inch square. Elevates from 1.7inch/4.5cm to 7.1inch/18cm.Maintenance:
after use, should be kept clean and stored in a cool, dry, non-corrosive gases

The JessEm Rout-R-Lift II has all the same great features as our Mast-R-Lift II but at a price we know you will appreciate. This lift is made out of aluminum with a phenolic top plate. The Rout-R-Lift II comes in 5 different styles depending on the router and router diameter you plan to use. This model is designed for use with Milwaukee 5615/5616/5619 routers with 3.32″ diameter motors.

Double-Sealed Ball Bearing Construction

Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.

Bearing the Tension of the Lift

The shafts on the Rout-R-Lift II, like all the Router Lifts, are pressed into a shaft mount with hydraulic pressure. The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.

Sturdy Construction

All the machined components on the Rout-R-Lift II are CNC machined for durability.

No Bent Wrenches

The bits can be easily changed from above the table without the need for bent wrenches.

Built for heavy-duty precision, the SawStop router lift features a chain-synchronized four-post lifting system, positive Lock, precision above-table Elevation measurement and adjustments, and adaptive collars to fit multiple router sizes. 9.25″ x 11.75″ top plate fits perfectly into each SawStop router Table.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Bench Dog Router Lift, eg:

• What are Top 10 Bench Dog Router Lift for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Bench Dog Router Lift to buy?
• What are Top Rated Bench Dog Router Lift to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Bench Dog Router Lift?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Bench Dog Router Lift.
• Before deciding to buy any Bench Dog Router Lift, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Bench Dog Router Lift and What you should consider when buying the Bench Dog Router Lift and Where to Buy or Purchase the Bench Dog Router Lift. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Bench Dog Router Lift of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Bench Dog Router Lift.