mixonelife 
Nowadays, there are so many products of amp for home subwoofer in the market and you are wondering to choose a best one.You have searched for amp for home subwoofer in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings amp for home subwoofer which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
Amazon.com
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers
- ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
Subwoofer Amplifier 300 Watt Mini Mono Audio Amp Full-Frequency and Sub Bass Switchable Amplifier One Channel Home Theater Single Power Subwoofer Amp Fosi Audio M03
Amazon.com
- 【Hi-Fi Amp with Clean Sound Quality】M03 subwoofer amp adopt with the Instruments TPA3255D2 chip, can provide 300watt output power for 4-8ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Polk Audio PSW10 10"Powered Subwoofer – Featuring High Current Amp and Low-Pass Filter | Up to 100 Watts | Big Bass at a Great Value | Easy integration Home Theater Systems
Amazon.com
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH - A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
- LOUDER CLEARER SOUND EVEN AT HIGH VOLUME - Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion. PSW Series subwoofers blend perfectly with systems composed of other Polk loudspeakers, especially TSi, RM and R/T/M Series speakers
PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.
Nobsound 100W Subwoofer Digital Power Amplifier Audio Mini Amp (Subwoofer, Black)
Amazon.com
- This subwoofer amplifier adopts brand-new TI TPA3116D2 amplifer chip, which can offer 100W powerful output and 90% efficiency.
- Compared with other similar products on the market, it also uses a NE5532 buffer op-amp to achieve more powerful performance.
- Its super mini size can be easily hold by one hand, which will be a good match for your desktop.
- Power supply (not included, search ASIN: B074J81XRB to get one): DC 8-25V; at least 3A; higher voltage and current within the limitation would bring higher power
Parameters:
- Audio input: 3.5mm
- Audio output: Banana plug
- Power supply: DC 8-25V; at least 3A
- Maximum power: 100W
- Chip: TPA3116D2 + NE5532
- Weight: 0.35Kg; 0.2Kg (without package)
- Dimensions: 68.5 * 33 * 90 mm (not including terminals)
Packing List:
- 1 * amplifier
Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater
Amazon.com
- To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems
- Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 – 200 Hz +/- 3dB
- Output Impedance: 4-8 ohm
- Sub volume and crossover control knobs
- LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs.
Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
Amazon.com
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
AOSHIKE 8-25V 100W TPA3116 Subwoofer Digital Power Amplifier Board TPA3116D2 Amplifiers NE5532 subwoofer Plate Amplifier
Amazon.com
- Power Range: 8-25V
- Power connector is a standard 5.5MM power jack,you can use your laptop power, Other input is Aux input,it is 3.5mm port
- Maximum output power: 50W (left channel) + 50W (Right channel), dual- channel output, efficiency up to 90 percent
- Adopt Tpa3116 high-performance amplifier chip as the core, DC single power supply, wide operating Voltage range 8-25V.
- Can use the switching power supply, laptop switching power supply, battery and vehicle power supply(Make sure the power supply is adequate,and 12-24V,About 3A.The audio input is sufficient,And the Power voltage/current is sufficient,in this case ,there will be enough output power.) Here is the 19V power link:https://www.amazon.com/gp/product/B07QBMVLTF?th=1
Subwoofer Amplifier TDA7498E Mini Sub Bass Amp Digital Class D Integrated Subwoofer Amplifier 220Watt x 1 Fosi Audio TP-02
Amazon.com
- Built-in low pass filter, 220W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
- Advanced circuitry design, built-in speakers protection circuit, solid aluminum chassis for long time use
- Adopt Texas Instruments TDA7498E chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound
Subwoofer Amplifier Receiver 100Watt Mini Hi-Fi Digital Class D Integrated Stereo Audio Amp for Sub Bass + Power Supply TP-01
Amazon.com
- Come with 19V power adapter that can be carefully matched with this home mono integrated amp physically as well as electrically
- Adopt Texas Instruments TPA3116 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Built-in low pass filter,100W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
Quick tips:
1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.
Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.
Parameter:
1. Power supply range: 12v-24v;
2. THD: ≤ 0.04%;
3. Frequency Range: 20Hz – 120Hz (±1 dB);
4. SNR: ≥ 98dB;
5. Input sensitivity: ≤ 280mV;
6. Terminating impedance: 2Ohm – 8Ohm;
7. Output power: 100W for Subwoofer;
8. Input mode: 3.5mm audio input;
9. Power supply: 19V 4.74A 90W;
10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
Acoustic Audio PSW-10 400 Watt 10-Inch Down Firing Powered Subwoofer (Black)
Amazon.com
- Acoustic Audio PSW-10 Specialty Series home theater powered subwoofer, 400 watts peak power, frequency response is 25Hz-250Hz, efficiency is 97dB, 8ohm impedance
- Built in digital drive high efficiency amplifier, 10” down firing long throw subwoofer, high rigidity PVA treated cone, adjustable independent gain control
- Low level and speaker level inputs and outputs, variable low pass frequency crossover control, signal sensing auto shut off function, phase control switch, bottom slotted bass port
Acoustic Audio’s Audiophile Series powered subs immerse you in the action of your fast-paced movies and sports. Add impact to your favorite movies and full-bodied bass to your favorite tunes with a sub that’s barely a cubic foot. Its stylish design and superior sound make it a smart addition to any home theater. Its elegant black ash finish is refined and complements most flat-panel displays. It features a high-current, 400-watt amp which effortlessly drives its down-firing 10″ woofer for dynamic low-frequency effects. The high and low inputs let you use any receiver or processor. The 10″ woofer utilizes a long excursion cone for deep, accurate response. The MDF bass-reflex enclosure features internal bracing, and a 25Hz to 250Hz frequency response delivers thumping bass from all your action movies and CD albums.
Pyle 1000 Watt Premium Home Audio Power Amplifier – Home Theater 4 Channel Stereo Receiver w/ Speaker Selector & Remote – for Amplified TV, Subwoofer Speakers, PA System – PT1100
Amazon.com
- 1000-WATT POWER: The Pyle 4 Channel Amplifier is perfect for your PA &
- home theater surround sound system. It gives you 1000 watts peak power which can be used for multi speakers w/ 2-8 ohms impedance allowing you to enjoy high quality music &
- movies
- 4 AUDIO INPUTS: This personal portable digital amp box supports 4 external sources - tape, tuner, AUX &
- DVD CD, w/ 2 ¼" microphone inputs for karaoke &
Monoprice 60-Watt Powered Subwoofer – 8 Inch With Auto-On Function, For Studio And Home Theater
Amazon.com
- This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
