mixonelife 
Nowadays, there are so many products of amplifier home audio board in the market and you are wondering to choose a best one.You have searched for amplifier home audio board in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings amplifier home audio board which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
Amazon.com
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers
- ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories
Amazon.com
- 100W Subwoofer Amplifier Board
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V)
- built-in TPA3116 amplifier chip
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
12V Amplifier Board, DROK PAM8620 Digital Stereo Amp Module 15W+15W 2.0 Dual Channel Class D 8-26V 12 v 24v Power Amplifier Circuit Mini Amplify
Amazon.com
- Parameters: DROK audio amplifier board working voltage is DC 8-26V, can be powered by 12V, 24V
- output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W.
- Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module.
Aideepen TDA7492P 50W+50W Audio Power Bluetooth Amplifier Board Dual Channel Wireless Digital Stereo Receiver AMP Board with 5.5×2.1mm 12V 2A AC Adapter and 1pair Male Female Jack Connector
Amazon.com
- POWERFUL 2x50W: Aideepen's 2 Channel Stereo Amplifier Board will let you enjoy wonderful quality stereo music and audio w/2x50W watts of power which can be used for multi speakers w/ 8 ohms impedance. Perfect for your for home or vehicle music streaming sound system
- Upgraded Version: Model: AD-001, with better quality capacitor resistance, the sound is more stereo
- Better performance heat dissipation
Bluetooth Amplifier Board, DROK Digital Amplifier Wireless BT 3.0 4.0 4.1 Audio Amp Board Headphone 2 Channel 50W+50W Bluetooth Speaker Board Small Amplifier Module with Case
Amazon.com
- DROK bluetooth audio amplifier board wide input voltage range is DC 4.5V-27V, can be powered by 12v or 24v, output power is 50Wx2, SNR is 102dB.
- 2 Audio Input Ways: user can directly connect this bluetooth speaker board with wireless Bluetooth 3.0/4.0/4.1, or choose the headphone (Line in) way.
- 2 Powering Methods: the digital amplifier module is equipped with wiring blocks and DC 2.1mm socket which is compatible with most laptop’s power port.
Subwoofer Amplifier Receiver 100Watt Mini Hi-Fi Digital Class D Integrated Stereo Audio Amp for Sub Bass + Power Supply TP-01
Amazon.com
- Come with 19V power adapter that can be carefully matched with this home mono integrated amp physically as well as electrically
- Adopt Texas Instruments TPA3116 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Built-in low pass filter,100W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
Quick tips:
1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.
Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.
Parameter:
1. Power supply range: 12v-24v;
2. THD: ≤ 0.04%;
3. Frequency Range: 20Hz – 120Hz (±1 dB);
4. SNR: ≥ 98dB;
5. Input sensitivity: ≤ 280mV;
6. Terminating impedance: 2Ohm – 8Ohm;
7. Output power: 100W for Subwoofer;
8. Input mode: 3.5mm audio input;
9. Power supply: 19V 4.74A 90W;
10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
Audio Amplifier Board, DROK PAM8406 Digital Power Amplifier Board 5W+5W Stereo Amp 2.0 Dual Channel Class D DC5V Amplify DIY Module for Speaker
Amazon.com
- Parameters: DROK audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input.
- Artificial Material: this New-designed power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module.
Clyxgs 2.1 Channel Class D Digital Power Audio Stereo AMP Module 2x80W+100W(Left,Right & Subwoofer) TPA3116D2 Amplifier Board,12-26V（ Recommended 24V） 100 decibels
Amazon.com
- ✅ Two TPA3116D2 chips – one for the left/ right channel power amplify and the second is in bridge connection with the front NE5532 to drive the subwoofer.
- ✅ DC 12-26V(24V recommended) wide input voltage
- 3.5mm audio input jack
- 3-pin audio input jack
- Volume/ Subwoofer/ Stereo knob adjustment.
- ✅ 80W*2+100W 2.1 channels (left+right+subwoofer), high efficiency and low heat.
WINGONEER TDA7498E 2x160W Dual Channel Audio Amplifier Board, Support BTL Mode 1X220W Single Channel, DC 24V Digital Stereo Power Amp Module for Car Vehicle Computer Speaker DIY
Amazon.com
- dopts original TDA7498E dual-BTL power amplifier chip, high power, good sound quality, no distortion, give you a great hearing enjoyment
- Output power: 160W+160W (Vcc = 36 V, RL = 4Ω, THD: 10%)
- Output power: 1x220W single channel in parallel BTL(Vcc = 36 V, RL = 3Ω, THD: 10%)
- High efficiency: 85%
- Wide range single power supply: 15-36VDC, with input reversed polarity protection (if speaker's real power is large enough, the recommended DC power supply is 32V, 8A or more)
AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth 4.2 Audio Amplifier Board 2x50W+100W(2x50W+100W)
Amazon.com
- 1.This is a support for Bluetooth audio receiver board, with preamp amplification, bass frequency processing. With bass, left and right channel volume adjustment, treble adjustment, the total volume potentiometer control 2.1 amplifier board.(Here is the link without Bluetooth:https://www.amazon.com/dp/B07D7T2TYZ)
- 2.DC power supply 12-24V power supply, maximum support 50W (left channel) +50 W (right channel) +100 W (bass channel) three-channel output.
DZS Elec TDA7297 Digital Amp Module AC/DC 10V to 15V 15W + 15W Dual Channel Digital Stereo Micro Audio Amplifier Board
Amazon.com
- Come With 3.5mm Stereo Audio Cable and 12V 2A Power Supply Adapter
- Single Power Supply: 10V-15V (Recommended: 12V Current >
- 2A), Can Be Used DC Power, AC Power, And The Battery Power Supply, Etc.
- Maximum Output(Dual Channel Output): 15W (Left Channel) + 15W (Right Channel)
- With Volume Potentiometer and LED Power Indicator.
- All The Parts Used Are All Genuine Good Quality, Low Noise, Can Be Suitable for Stable Jobs
Power Amplifier Board, DROK 30W+30W Dual Channel 2.0 Audio Amplifier Kit Class AB DC 12V Digital Stereo Amp Module TDA7377 Car Amplify Circuit for Speakers System DIY
Amazon.com
- PARAMETER --- operating voltage DC 9V-18V, recommend DC 12V
- max output power 2x35W (18V/4Ohm)
- can be connected 4~8 ohms speakers.
- PROPERTY --- class AB, 2.0 dual channel.
- INPUT METHOD --- 3.5mm audio cable input.
- PROTECTION --- input reverse connection protection
DROK 30W+30W Dual Channel Car Stereo Audio Amplifier Board
Parameter:
Working voltage: DC 9v-18v, recommend DC 12v.
Output power: 2x 35W max (18V 4Ohm). Can be connected to 4~8 ohms speakers.
Input method: 3.5mm audio cable
Potentiometer rotating handle opening: 7mm
PCB size: 55.12*45.21mm
Overall dimensions (including heat sink): 55.12*59.09*50mm
Protective Functions:
Input reverse protection, short-circuit protection, over-current protection, over-heat protection.
Package Included:
1x Power Amplifier Board
