mixonelife 
Nowadays, there are so many products of class d home subwoofer amplifier in the market and you are wondering to choose a best one.You have searched for class d home subwoofer amplifier in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings class d home subwoofer amplifier which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
Amazon.com
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Subwoofer Amplifier 300 Watt Mini Mono Audio Amp Full-Frequency and Sub Bass Switchable Amplifier One Channel Home Theater Single Power Subwoofer Amp Fosi Audio M03
Amazon.com
- 【Hi-Fi Amp with Clean Sound Quality】M03 subwoofer amp adopt with the Instruments TPA3255D2 chip, can provide 300watt output power for 4-8ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
AIYIMA 300W Subwoofer Amplifier TPA3255 HiFi Mono Audio Power Amplifier Class D Amp NE5532 Sub Plate Amplifier with Bass Treble Adjust DC 24V-35V TPA3255(Black-300W)
Amazon.com
- Adopt Texas Instruments TPA3255 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- 300W Mono integrated class D amplifier with 32V/5A large power supply
- Simple compact design,And the exterior design is delicate and beautiful
- It can match with computer/ desktop /Home theatre system and so on
- Can connect to both passive and active subwoofers
SMSL AD18 HiFi Audio Stereo Amplifier with Bluetooth 4.2 Supports Apt-X,USB DSP Full Digital Power Amplifier 2.1 for Speaker,Small 80Wx2 Class D Amplifier with Subwoofer Output
Amazon.com
- This class D amplifier Supports USB coaxial analog Bluetooth and two optical inputs
- With amplifier output port, 3.5mm headphone jack and subwoofer outputs, 80w*2 output power, 1.44-Inch Color screen, The brightness of the display can be adjusted
- Customized BT4.2 Bluetooth module, Supports apt-X, easily connect with Bluetooth by NFC
- The Bluetooth amplifier uses tas5508c+tas5342a from TI as amplifier chips, DSP technology, built-in SDB sound patented
AD 18 is a small full digital class d bluetooth amplifier built-in headphone amplifier supports subwoofer output.Connect it to your computer and use it to drive your headphones with an amplifier or to power your passive speakers(4ohm speaker produces 80Wx2 output power).Sophisticated matting aluminum housing reduces interference. Patented SDB sound and +-8 level treble and bass adjustment. Independent headphone amplifier design and advanced DSP technology makes the unit more desirable. Amplifier Chip: Using TAS5508C for digital signal DSP processing and Pre-Amp.TAS5342A for digital signal rear-AMP. It will be through LC filter and then send to amplifier output jack. Digital Receiving Chip:CS8422.It receive optical and coaxial signal and all signal transfer. USB chip:TAS1020B. Supports stereo sound 24bit/96kHz.For much better sound, we use SDPI output instead of internal DAC output design. Strong anti-interference ability and More High-Fidelity. HP Amplifier Chip:MAX97220A. Dual-OP amplifier:NE5532 with High efficiency low noise. Analog/Digital converter IC :CS5341,Accurate to 24 bit 48kHz.Convert AUX signal to digital signal. Then digital signal processing by CS8422 Specification Type: Full digital decoding amplifier Input port: USB/AUX/3.5mm Coaxial and Optical 1/Bluetooth/Optical 2 Output Port: Amplifier output port/3.5mm Headphone port/Subwoofer Voltage: 24V Output power:80W x 2 SNR(Signal to Noise): 90dB THD+N: 0.04% Power consumption: 50W Standby power:0.8w EQ adjustment: 7 Headphone output(32ohm): 53mW@THD=0.04% USB sampling rate: 24bit 96kHz Optical sampling rate:44.1kHz-192kHz Coaxial sampling rate:44.1kHz-192kHz Treble adjustment range: ±8db,Bass adjustment range:±8db Net Weight: 572g Gross Weight:1585g Machine Size: 172*51*85mm
TDA7498E 2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp for Home Speakers 160W x 2 + 24V Power Supply
Amazon.com
- Adopt Texas Instruments TDA7498E chip to get clear audio sound, No pop, no audible noise, dead silent when nothing is playing through it.
- 160W X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), for outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers, can use iPod, Phone, MP3 players, TV, Echo Dot, CD players, or Streaming Media players as input.
- 2.0CH audio integrated amplifier, aluminum enclosed, small size, good looks, simple functionality, and excellent sound quality
AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories
Amazon.com
- 100W Subwoofer Amplifier Board
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V)
- built-in TPA3116 amplifier chip
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
Douk Audio TPA3116 2.1 50WX2+100W+ Bluetooth Class D Power Amplifier Completed Board New
Amazon.com
- 100% brand new and high quality. Using original TPA3116 and CSR4.0 Bluetooth module
- Coupling capacitance by Germany's Siemens 1UF. Signal main circuit electrolytic capacitors used in Taiwan brand, the main filter capacitor electrolytic capacitors imported from Japan to ensure strong support for a steady stream of power.
- Resistance selection Rings metal resistance, the main circuit employs a precision of ± 1% metal film resistors rings, ensure the machine a good signal to noise ratio.PCB using 1.6mm thick double-sided sheet, 2.0 oz copper thickness, HASL whole process to ensure that the size of the current through the good performance. PCB-class quality.
Parameters :
Work modle: class D
Quiescent current: 60mA
Work efficiency: 90%
Rated output power: 100W+2*50W
Frequency response: 20Hz to 20KHz
Working voltage: DC18V to DC24V
Maximum output current: 3A
PCB SIZE：(L*W)10.4*10.3cm/4.09″*4.06″
Input mode: only bluetooth input function.
Potentiometer distance : 22MM 22MM 30MM
Quantity:1Pc
Note:
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Nobsound 2.1 Channel Bluetooth 5.0 Amplifier, Class D Stereo Audio Amplifier, Mini Home Theater Power Amp, Digital Power Subwoofer Amplifier Receiver, 100W+50Wx2, Treble&Bass Control (NS-14G PRO)
Amazon.com
- 200W 2.1 channel digital amplifier can offer 100W for subwoofer and 50W for each channel
- Upgrade to Bluetooth 5.0. Can offer stable and high sound quality wireless transmission
- With TREBLE & BASS independent control and BASS VOL & FREQ independent control
- Sound is analytical and clear with balanced tri-frequency and no background noise
- Can be powered by DC 12~25V including power supply, storage battery and car power
2 Channel Stereo Audio Class D Amplifier Mini Hi-Fi Professional Digital Amp for Home Speakers 50W x 2 – V1.0G
Amazon.com
- Advanced circuitry design, built-in speakers protection circuit, solid aluminum chassis for long time use, small size, good looks, simple functionality, and excellent sound quality
- Best for bookshelf/computer/desktop/speakers in your room, connect to your Phone/MP3 player/DC/TV/Echo Dot as input, 50W X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD) can drive 2Ohm - 8Ohm speakers
- Home Hi-Fi integrated amplifier, Exclusively designed for the customers who pursue HiFi sound
AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth 4.2 Audio Amplifier Board 2x50W+100W(2x50W+100W)
Amazon.com
- 1.This is a support for Bluetooth audio receiver board, with preamp amplification, bass frequency processing. With bass, left and right channel volume adjustment, treble adjustment, the total volume potentiometer control 2.1 amplifier board.(Here is the link without Bluetooth:https://www.amazon.com/dp/B07D7T2TYZ)
- 2.DC power supply 12-24V power supply, maximum support 50W (left channel) +50 W (right channel) +100 W (bass channel) three-channel output.
Subwoofer Amplifier Receiver 100Watt Mini Hi-Fi Digital Class D Integrated Stereo Audio Amp for Sub Bass + Power Supply TP-01
Amazon.com
- Come with 19V power adapter that can be carefully matched with this home mono integrated amp physically as well as electrically
- Adopt Texas Instruments TPA3116 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Built-in low pass filter,100W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
Quick tips:
1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.
Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.
Parameter:
1. Power supply range: 12v-24v;
2. THD: ≤ 0.04%;
3. Frequency Range: 20Hz – 120Hz (±1 dB);
4. SNR: ≥ 98dB;
5. Input sensitivity: ≤ 280mV;
6. Terminating impedance: 2Ohm – 8Ohm;
7. Output power: 100W for Subwoofer;
8. Input mode: 3.5mm audio input;
9. Power supply: 19V 4.74A 90W;
10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116(with Power Supply) – Fosi Audio TB10A
Amazon.com
- Perfectly suited for your desktop or a smaller space in your home or office, digital amplifier is easy to connect to your audio system with no software to install or settings to change
- 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers
- Simple compact design but practical and powerful
- No pop, no audible noise, dead silent when nothing is playing through it
