Top 10 Dremel Foot Switch

This Linemaster T-91-SC3A Treadlite II 15 amp 125V, 1/2 HP foot switch has steel-formed housing, non-skid pads, and cord with plug and is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination. It has a steel-formed housing with an electro-coated finish for durability and protection from corrosion. The non-skid foot pad and base give the foot switch stability to help prevent sliding on smooth floors, and it and has bolt holes for mounting to the floor or equipment. The low profile and light pressure required to operate reduces operator fatigue. An adjustable strain relief clamp protects the cord (included) from damage caused by pulling or stretching. This foot switch meets Canadian and United States Underwriters Laboratories (UL) standards for quality assurance and meets European Conformity (CE) product compliance safety standards. It has an Ingress Protection (IP) rating of 20 for protection against small amounts of dripping water and access with a finger, and it is compliant with the Restriction of Hazardous Substances (RoHS) directive. A heavy gauge steel guard and other accessories are available for this product (contact manufacturer). This momentary operation foot switch is suitable for low-power, light-duty applications such as dental or medical, office, and power tools, among others.

Specifications

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Foot switches are used to turn on and off electrical devices and may also provide control over the device’s speed and mode of operation. They come with up to three pedals and can have a maintained, momentary, variable, or anti-trip switch action. For maintained action switches, one press of the pedal controls the power, whereas momentary action switches require constant pressure on the pedal for power. Variable action switches (also called foot potentiometers) function similarly to momentary action switches, but also provide control over the connected device’s operating speed. Anti-trip action switches require users to release a safety latch before pressing down for momentary action. Foot switches vary in their contact specifications, amp ratings, plugs and receptacles, and material construction to suit different applications, device amperages, plug configurations, and environments. Foot switches are commonly used with power tools, sewing machines, musical instruments, dental equipment, and lighting, and in the construction, laboratory, production, and medical fields, among others.

Linemaster Switch Company manufactures electromechanical, pneumatic, digital, linear Hall effect, and wireless foot switches for use in the industrial, medical, computer, and musical fields, among others. The company, founded in1952, is headquartered in Woodstock, Connecticut, and meets International Organization for Standardization (ISO) 2001:2008 and ISO 13485:2003 standards.

This Linemaster 491-S Compact 10 amp 125-250V, 1/2 HP foot switch has a steel housing, a non-skid base, and strain-relief cord clamp. This foot switch is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination, and it is compact to reduce operator fatigue. It has a steel housing for durability and protection from corrosion and bolt holes for mounting to the floor or equipment. The non-skid base gives the foot switch stability to help prevent sliding on smooth floors. An integral, adjustable strain relief clamp protects the cord (not included) from damage caused by pulling or stretching. This foot switch meets Canadian and United States Underwriters Laboratories (UL) standards for quality assurance and meets European Conformity (CE) product compliance safety standards. It has an Ingress Protection (IP) rating of 20 for protection against small amounts of dripping water and access with a finger. An awareness cover, guard, and other accessories are available for this product (contact manufacturer). This momentary operation foot switch is suitable for light-duty applications such as dental or medical, office, and power tools, among others.

Specifications

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Foot switches are used to turn on and off electrical devices and may also provide control over the device’s speed and mode of operation. They come with up to three pedals and can have a maintained, momentary, variable, or anti-trip switch action. For maintained action switches, one press of the pedal controls the power, whereas momentary action switches require constant pressure on the pedal for power. Variable action switches (also called foot potentiometers) function similarly to momentary action switches, but also provide control over the connected device’s operating speed. Anti-trip action switches require users to release a safety latch before pressing down for momentary action. Foot switches vary in their contact specifications, amp ratings, plugs and receptacles, and material construction to suit different applications, device amperages, plug configurations, and environments. Foot switches are commonly used with power tools, sewing machines, musical instruments, dental equipment, and lighting, and in the construction, laboratory, production, and medical fields, among others.

Linemaster Switch Company manufactures electromechanical, pneumatic, digital, linear Hall effect, and wireless foot switches for use in the industrial, medical, computer, and musical fields, among others. The company, founded in1952, is headquartered in Woodstock, Connecticut, and meets International Organization for Standardization (ISO) 2001:2008 and ISO 13485:2003 standards.

This all-purpose Linemaster foot switch has a reinforced polymeric pedal, a 6′ power cord, and a single two-prong outlet for connecting with lights and other electric devices. The 4 amp 125V foot switch allows users to step on the switch’s pedal for hands-free on-and-off power. It has maintained operation for press-and-release power activation and termination. The foot switch has a reinforced polymeric body that resists corrosion and rust, and comes with a non-glare finish. Raised ribs on the pedal’s surface provide traction, while the non-skip base gives the foot switch stability to prevent sliding on hard floors. Under the foot switch’s cover, an integrated adjustable strain relief clamp helps to hold the 6′ stranded parallel thermoplastic (SPT) type 2 cord in place. A two-prong plug at the end of the cord connects to electrical outlet, while a two-prong outlet located on the plug’s side is provided with a 500W capacity for connecting with the two-prong plugs of the lights or devices to be powered. The foot switch meets Canadian and United States Underwriters Laboratories (UL) standards for quality assurance. Intended for light-duty applications, the foot switch provides access to hard-to-reach outlets and switches.

Foot switches are used to turn on and off electrical devices and may also provide control over the device’s speed and mode of operation. They come with up to three pedals and can have a maintained, momentary, variable, or anti-trip switch action. For maintained action switches, one press of the pedal controls the power, whereas momentary action switches require constant pressure on the pedal for power. Variable action switches (also called foot potentiometers) function similarly to momentary action switches, but also provide control over the connected device’s operating speed. Anti-trip action switches require users to release a safety latch before pressing down for momentary action. Foot switches vary in their contact specifications, amp ratings, plugs and receptacles, and material construction to suit different applications, device amperages, plug configurations, and environments. Foot switches are commonly used with power tools, sewing machines, musical instruments, dental equipment, and lighting, and in the construction, laboratory, production, and medical fields, among others.

Linemaster Switch Company manufactures electromechanical, pneumatic, digital, linear Hall effect, and wireless foot switches for use in the industrial, medical, computer, and musical fields, among others. The company, founded in1952, is headquartered in Woodstock, Connecticut, and meets International Organization for Standardization (ISO) 2001:2008 and ISO 13485:2003 standards.

This Linemaster 491-SC3 Compact 10 amp 125V, 1/2 HP foot switch has a steel housing, a non-skid base, and a 6′ cord with plug. This foot switch is suitable for use in applications in which users need hands-free, on-and-off power activation. The foot switch provides momentary operation for quick-release termination, and it is compact to reduce operator fatigue. It has a steel housing for durability and protection from corrosion. The non-skid base gives the foot switch stability to help prevent sliding on smooth floors and has bolt holes for mounting to the floor or equipment. An integral, adjustable strain relief clamp protects the cord (plug and cord included) from damage caused by pulling or stretching. This foot switch meets Canadian and United States Underwriters Laboratories (UL) standards for quality assurance and has an Ingress Protection (IP) rating of 20 for protection against small amounts of dripping water and access with a finger. An awareness cover, guard, and other accessories are available for this product (contact manufacturer). This momentary operation foot switch is suitable for light-duty applications such as dental or medical, office, and power tools, among others.

Specifications

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Foot switches are used to turn on and off electrical devices and may also provide control over the device’s speed and mode of operation. They come with up to three pedals and can have a maintained, momentary, variable, or anti-trip switch action. For maintained action switches, one press of the pedal controls the power, whereas momentary action switches require constant pressure on the pedal for power. Variable action switches (also called foot potentiometers) function similarly to momentary action switches, but also provide control over the connected device’s operating speed. Anti-trip action switches require users to release a safety latch before pressing down for momentary action. Foot switches vary in their contact specifications, amp ratings, plugs and receptacles, and material construction to suit different applications, device amperages, plug configurations, and environments. Foot switches are commonly used with power tools, sewing machines, musical instruments, dental equipment, and lighting, and in the construction, laboratory, production, and medical fields, among others.

Linemaster Switch Company manufactures electromechanical, pneumatic, digital, linear Hall effect, and wireless foot switches for use in the industrial, medical, computer, and musical fields, among others. The company, founded in1952, is headquartered in Woodstock, Connecticut, and meets International Organization for Standardization (ISO) 2001:2008 and ISO 13485:2003 standards.