mixonelife 
Nowadays, there are so many products of dsp home audio in the market and you are wondering to choose a best one.You have searched for dsp home audio in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings dsp home audio which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Puffin Phono DSP phono preamp from Parks Audio for all vinyl systems
Amazon.com
- Tilt tone controls for fast, easy sound adjustment
- Twenty gain settings from -4dB (CDs) to 72dB (MCs)
- 12+ phono EQ settings w/ support for early LPs and 78s
- Adjust Bass, Treble, Air, and 4th order HPF & LPFs
- Apply transfer functions like tube (2H) and tape (3H)
The Puffin is simply a next-generation phono preamp with a wide range of gain settings which allows easy system matching for all carts and vinyl systems. The wide selection of tone controls then make it a breeze to tweak the sound to perfection. The proof is in the Puffin.
100 Watt 40 Inch TV Sound Bar, MEGACRA Home Theater System Wired and Wireless Soundbar Speaker(IR Learning Remote, 105dB, DSP Audio, Bass Adjustable,Wall Mountable)
Amazon.com
- 100 watt 40 inch deep bass sound bar trasfer 105dB room-filling and and crystal-clear home theater sound.
- Use MEGACRA remote…or your current TV/Cable remote to control it(power, mute, volume)
- Various sound effect mode, Movies/Music/Dialogue mode, highlighting the sound effects of different occasions.
- Dual Wired and Wireless Connection, pair via Bluetooth from up to 33 ft / 10 m or connect with the in-unit 3.5 mm, RCA, and optical inputs.
OSD Audio 1000W Mono-Channel Class D Subwoofer Amplifier – Onboard DSP, 4-8 Ohm – SMP500
Amazon.com
- The SMP500 is designed for use with higher wattage passive subwoofers that require external power with up to 1000 watts power peak / 400 watts RMS with 4 ohms. It has highly efficient Class D technology to run cool under demanding loads.
- SOUND QUALITY: Get a deep, crisp, clean low-frequency sound effect in dedicated home theater systems and media rooms to improve the overall sound quality of surround sound systems with dual 100/220 voltage.
SMSL AD18 80W2 Bluetooth 4.2 HiFi USB DSP Digital Decoding Power Amplifier
Amazon.com
- This stereo audio amplifier supports USB coaxial analog Bluetooth and two optical input
- With amplifier output port and headphone Port, 80w*2 output power
- Customized BT4. 2 Bluetooth module, easily connect with Bluetooth by NFC
- Using tas5508c+tas5342a from essential, DSP technology, built-in SDB sound patented
- It is a multi-functional power amplifier with Headphone amplifier and remote control
AD 18 is a multi-functional digital power amplifier with headphone amplifier. Up to six kinds of input including USB, coaxial, analog, Bluetooth and two optical jacks(round and square). Customized BT4. 2 Bluetooth module, device easily connect with Bluetooth by NFC. Using TAS5508C+TAS5342A from TI. Headphone amplifier adopts independent IC. Using advanced DSP technology, with 1. 44-inch color screen and remote control. Built-in SDB sound patented belongs to S. M. S. L. Amplifier Chip: Using TAS5508C for digital signal DSP processing and Pre-Amp. TAS5342A for digital signal rear-AMP. It will be through LC filter and then send to amplifier output jack. Digital Receiving Chip: CS8422. It receive optical and coaxial signal and all signal transfer. USB chip: VT1620A. Support stereo sound 16bit/24bit and sampling rate up to 192kHz. For much better sound, we use SDPI output instead of internal DAC output design. Strong anti-interference ability and More High-Fidelity. HP Amplifier Chip: MAX97220A. Dual-OP amplifier: NE5532 with High efficiency low noise. Analog/Digital convertor IC: CS5341, Accurate to 24 bit 48kHz. Convert AUX signal to digital signal. Then digital signal processing by CS8422 Specification Input port: 3. 5mm, USB/Coaxial/Bluetooth/Optical x 2 Output Port: Amplifier output port/Headphone Port Voltage: 24V Output power: 80W x 2 SNR(Signal to Noise): 90dB THD+N: 0. 04% Headphone output(32ohm): 53mW@THD=0. 04% USB sampling rate: 16bit: 44. 1kHz-192kHz 24bit: 44. 1kHz-96kHz Output consumption: 50W EQ adjustment: 7 Treble adjustment range: 8db Bass adjustment range: 8db Net Weight: 572g Whole Weight: 1485g Machine Size: 172*51*85mm Package Size: 275*231*74mm Package included: 1*AD18 1*Micro USB cable 1*Remote control 1*Antenna 1*Power supply
Yamaha RX-V683BL 7.2-Channel MusicCast AV Receiver with Bluetooth, Works with Alexa
Amazon.com
- Works with Alexa for voice control (Alexa device sold separately).
- 7.2-channel surround sound with Dolby Atmos and DTS: x
- Add Audio in up to 9 additional rooms with musiccast
- When ECO mode is turned on it can reduce power consumption by about 20 percent
- DSP Programs:17
This 7.2-Channel 4K Ultra HD network AV receiver Features Dolby Atmos and DTS: x object based surround sound. Download the free Music Cast controller app on your smart device to make access your music library and streaming music services easy. Add audio in up to 9 additional rooms with Music Cast wireless speakers or other Music Cast devices. Wi-Fi, Bluetooth and airplay wireless connectivity, a phono input for vinyl playback and zone 2 audio provide added system versatility.
Yamaha RX-V385 5.1-Channel 4K Ultra HD AV Receiver with Bluetooth
Amazon.com
- 5.1-Channel powerful surround sound
- Bluetooth for wireless connectivity.Rated Output Power (1kHz, 1ch driven)- 100 W (8 ohms, 0.9% THD). Rated Output Power (20Hz-20kHz, 2ch driven)- 70 W (8 ohms, 0.09% THD). Maximum Effective Output Power (1kHz, 1ch driven) (JEITA)- 145 W (6 ohms, 10% THD)
- HDMI 2.1 with HDCP 2.2 (4-in/1-out)
- 4K Ultra HD support, HDR10, Dolby vision, hybrid log-gamma and BT.2020
- YPAO auto-calibration technology for ideal sound,Exclusive Yamaha CINEMA DSP technology supports playback of HD Audio (Dolby TrueHD, DTS-HD Master Audio, etc.), providing natural and expansive sound imaging
SMSL AD18 HiFi Audio Stereo Amplifier with Bluetooth 4.2 Supports Apt-X,USB DSP Full Digital Power Amplifier 2.1 for Speaker,Small 80Wx2 Class D Amplifier with Subwoofer Output
Amazon.com
- This class D amplifier Supports USB coaxial analog Bluetooth and two optical inputs
- With amplifier output port, 3.5mm headphone jack and subwoofer outputs, 80w*2 output power, 1.44-Inch Color screen, The brightness of the display can be adjusted
- Customized BT4.2 Bluetooth module, Supports apt-X, easily connect with Bluetooth by NFC
- The Bluetooth amplifier uses tas5508c+tas5342a from TI as amplifier chips, DSP technology, built-in SDB sound patented
AD 18 is a small full digital class d bluetooth amplifier built-in headphone amplifier supports subwoofer output.Connect it to your computer and use it to drive your headphones with an amplifier or to power your passive speakers(4ohm speaker produces 80Wx2 output power).Sophisticated matting aluminum housing reduces interference. Patented SDB sound and +-8 level treble and bass adjustment. Independent headphone amplifier design and advanced DSP technology makes the unit more desirable. Amplifier Chip: Using TAS5508C for digital signal DSP processing and Pre-Amp.TAS5342A for digital signal rear-AMP. It will be through LC filter and then send to amplifier output jack. Digital Receiving Chip:CS8422.It receive optical and coaxial signal and all signal transfer. USB chip:TAS1020B. Supports stereo sound 24bit/96kHz.For much better sound, we use SDPI output instead of internal DAC output design. Strong anti-interference ability and More High-Fidelity. HP Amplifier Chip:MAX97220A. Dual-OP amplifier:NE5532 with High efficiency low noise. Analog/Digital converter IC :CS5341,Accurate to 24 bit 48kHz.Convert AUX signal to digital signal. Then digital signal processing by CS8422 Specification Type: Full digital decoding amplifier Input port: USB/AUX/3.5mm Coaxial and Optical 1/Bluetooth/Optical 2 Output Port: Amplifier output port/3.5mm Headphone port/Subwoofer Voltage: 24V Output power:80W x 2 SNR(Signal to Noise): 90dB THD+N: 0.04% Power consumption: 50W Standby power:0.8w EQ adjustment: 7 Headphone output(32ohm): 53mW@THD=0.04% USB sampling rate: 24bit 96kHz Optical sampling rate:44.1kHz-192kHz Coaxial sampling rate:44.1kHz-192kHz Treble adjustment range: ±8db,Bass adjustment range:±8db Net Weight: 572g Gross Weight:1585g Machine Size: 172*51*85mm
2.1 Channel 100Watt Sound bar(2020 Model), Bestisan Soundbar with Built in Subwoofer Bluetooth 5.1 Surround Sound Systems (32Inches, DSP, Touch Remote Control, Bass Adjustable)
Amazon.com
- ????2.1 channel 100watt: Built in 2 subwoofers and 2 full-range speakers, the max goes up to 100watt.
- ????Touch and Remote: Smooth touch screen and infrared remote control, the speaker is responsive, allowing you to easily control this sound bar.
- ????Bluetooth 5.1 advantage: 4 times signal range
- 2 times connection speed
- 8 times data transmission.
- ????3D surround sound: The sound field is wide and the left and right displacement of the sound is extremely precise and clear. This makes the flat TV sound stereo.
Q100 2.1 Channel Hi-Fi Bluetooth 5.0 Power Amplifier Class D Mini Stereo Audio Amp Speaker Subwoofer Wireless Receiver 80W+40Wx2 Dual DSP (Black)
Amazon.com
- Low frequency can be as low as 30Hz, 2.1 channel with powerful subwoofer output and shocking bass, sounds smooth and full. Hi-Fi sound with rich details and excellent quality brings auditory feast.
- Dual DSP sound effects, adopting STA326 power amp chip with DSP and ATS2825C Bluetooth chip with 16 kinds of sound effects with DSP, much better sound quality and shocking auditory effects make you feel like in the cinema.
Parameters:
Max output power: 80W+40W*2
Bluetooth version: Bluetooth 5.0 + DSP Bluetooth distance: about 10-15M
Audio input: Bluetooth / AUX
Audio output: Banana speaker / subwoofer
Amplifier chip: STA326(with DSP)
Decoding chip: PCM1802
Bluetooth chip: ATS2825C(with DSP)
Best matched L/R Speakers: 4-6.5 in (4-8Ω/20-120W）
Best matched passive subwoofer: 6.5-12 in (4-8Ω/40-120W）
Power input: DC 24V-32V/above 3A
Dimensions: (L)110*(W)68*(H)23mm / 4.33*2.68*0.91in
Net Weight: 0.2KG / 0.44lb
Package Weight: 0.55KG / 2.1lb
Notice:
1. Because of its large power output and compact design, it is normal that the chassis temperature will rise and feeling a little hot during use.
2. Default send 24V/3A(72W) power supply enough for 1 pair 5 inch speaker and 1*6.5 inch subwoofer. But floor speakers over 1M need larger power supply. Its auto power-off during use means that speakers need higher power, please turn down the volume or change larger power supply. High-quality 24V/6A power supply please click: https://www.amazon.com/dp/B07T95XBGB
Packing List:
1*Q100 Power Amplifier
1*24V/3A Power Supply
1*RCA Cable
1*AUX Cable
1*Manual
1*Packing Box
Q100 Hi-Fi Bluetooth Amplifier Wireless Audio Receiver with 24V 3A DC Adapter, 2.1 Channel Class D Stereo Audio Amp, Mini Home Theater Power Speaker Amp, 80W+40Wx2 Digital Bass Amp, Dual DSP (Black)
Amazon.com
- DUAL DSP SOUND EFFECTS - Adopting STA326 power amp chip with DSP and ATS2825C Bluetooth chip with 16 kinds of sound effects with DSP, much better sound quality and shocking auditory effects make you feel like in the cinema.
- 2.1 CHANNEL - Low frequency can be as low as 30Hz, 2.1 channel with powerful subwoofer output and shocking bass, sounds smooth and full. Hi-Fi sound with rich details and excellent quality brings auditory feast.
Crown XLi1500 Two-channel, 450W at 4Ω Power Amplifier
Amazon.com
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA & XLR inputs
- binding post and Speak on outputs
- Efficient forced-air cooling prevents excessive thermal buildup
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.
Audio USB Mixer with Effects, 4-Channel, 3-Band EQ, USB Powered and Output, USB Audio Interface to PC and Built-in DSP, Ideal for Live Stream Recording, Webcasting, Gaming (Phenyx Pro PTX-10)
Amazon.com
- 4-INPUT AND 3-BAND EQ: This premium ultra-low noise audio preamp has 4 inputs. It features ultra-musical 3-band EQ control and +48V Phantom Power switch on Ch. 1, enabling easy and accurate adjustment of personal music mix
- USB AUDIO INTERFACE WITH DSP EFFECT: Built-in stereo audio interface to connect directly with your PC/Mac/PS4 and work with Pro Tools/Logic Pro X/GarageBand/Adobe Audition/Audacity. The built-in high quality digital effect adds personality to your mix by processing the sound input from Ch. 1.
