Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Back View
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.

Switchable Mixing (Karaoke) Mode

When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)

Switchable MIC Pager Mode

When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.

USB 2.0 Input Interface with LED Indicator

You’ll be in control with playback options when you insert a USB flash drive –or similar USB device. Play your favorite audio files from your computer’s media library when you connect it directly into the amplifier.

.14-Inch AUX-In Jack

The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players etc.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

.25-Inch Phone Jack

Accepts headphones with .25-inch plugs.

.25-Inch Microphone Input Jack

Accepts microphones with .25-inch plugs.

REC RCA Output

Lets you connect the amplifier to a tape deck for recording.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 120 Watt RMS at four Ohms
• Blue LED Output Level Display
• Frequency Response: 20 Hz-20 kHz
• Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
• Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
• Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inches

Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

Back View
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 75 Watt to handle all your audio needs.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

Compatibility

Compatible with CD players, walkmans, and computerized devices, including MP3s, via 3.5 millimeter to RCA converter.

RCA L/R Line Input

Lets you connect the desired line input source.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier.

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20 millimeter fuse –not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 75 Watt RMS at 4 Ohm
• Blue LED Output Level Display
• Frequency Response: 20 Hz-40 kHz
• Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20 millimeter)
• Power Requirement: 120 V AC 50 Hz/230 V AC 50 Hz
• Tone Controls: Bass and Treble: +/-10dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inch (190 x 70 x 137 millimeter)

This Pyle Pro 1000-watt receiver has a built in DVD player, USB drive, and auxiliary RCA input. In other words, it can handle almost anything you throw at it–your favorite movies, the video clips you store on your USB drive, or your favorite music on your iPod. Each input has its own gain control. The digital colorful fluorescent display shows relevant track and disc information in addition to proving a power level dB display. This unit is also equipped with an AM/FM tuner with up to 60 presets. The PD1000A powers up to 4 speakers, and has RGB, RCA, and S-video outputs as well as a subwoofer line output. It runs on selectable 110V or 220V for easier system integration.

The digital colorful fluorescent display shows relevant track and disc information

Powers 4 Loudspeakers

The PD1000A can power up to four loudspeakers for room-filling sound. Separate gain controls for DVD, Tuner, USB, and MP3 ensure that you get the power you need for the sound and source you want. A subwoofer line audio output gives you added versatility for a bigger sound. A/B audio speaker selectors make it easy to choose between multiple speaker configurations.

Multi Media Disc Formats Compatible

Play virtually any disc on the Pyle PD1000A, including DVDs, CDs, and VCDs. This system also supports user-burned discs including CD-R, CD-RW, and MP4 data discs.

This Pyle Pro 1000-watt receiver has a built in DVD player, USB drive, and auxiliary RCA input

Digital Colorful Fluorescent Display

The colorful front panel features a 1-line flourescent display that displays time, station, and power information. The front panel is illuminated with blue LED lights for and a visual power level DB display for information and makes an attractive addition to any home theater system.

AM/FM Quartz Synthesized Radio Tuner

The quartz-tuned AM/FM radio comes with a 50-station AM/FM memory preset, as well as Auto Station Seek/Store for a simple way to get quick access to all your area’s radio station information.

USB and AUX Inputs for Digital Music

Use the AUX input to connect your digital media players such as iPod, iPhone, or Android music phone and listen to your digital music files over your home stereo system. A USB reader function for use with portable USB drives lets you play your MP3 tunes from a portable flash memoery drive.