Best Home Subwoofer Amo

Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!

PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.

Power Ratings:

RMS Power Output:
Stereo 8 Ohm: 2 x 250W
Stereo 4 Ohm: 2 x 400W
Bridged 4 Ohm: 1 x 800W
Peak Power Output:
Stereo 8 Ohm: 2 x 1000W Max
Stereo 4 Ohm: 2 x 1500W Max
Bridged 4 Ohm: 1 x 3000W Max

Terminals:

Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
RCA A & B Inputs
Output Terminals:
Banana binding post speaker output
Speakon output
XLR direct output

Features:

Rockville RPA9 3000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
2U rack space
Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers
Channel A & B Clipping Led Indicators
Channel A & B Separate Level Controls
Power, signal, overload, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles
Built-in dual high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm Speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
User serviceable fuse (5A, 250V)
Frequency Response: 20Hz to 20KHz 102dB
Power Requirements: 120V / 50-60Hz
Weight: 17.19 lbs
Dimensions: 18.97 x 13.97 x 3.54 inch

Parameters:

• Audio input: 3.5mm
• Audio output: Banana plug
• Power supply: DC 8-25V; at least 3A
• Maximum power: 100W
• Chip: TPA3116D2 + NE5532
• Weight: 0.35Kg; 0.2Kg (without package)
• Dimensions: 68.5 * 33 * 90 mm (not including terminals)

Packing List:

• 1 * amplifier

Quick tips:

1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.

Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.

Parameter:

1. Power supply range: 12v-24v;

2. THD: ≤ 0.04%;

3. Frequency Range: 20Hz – 120Hz (±1 dB);

4. SNR: ≥ 98dB;

5. Input sensitivity: ≤ 280mV;

6. Terminating impedance: 2Ohm – 8Ohm;

7. Output power: 100W for Subwoofer;

8. Input mode: 3.5mm audio input;

9. Power supply: 19V 4.74A 90W;

10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.