mixonelife 
Nowadays, there are so many products of home subwoofer crossover in the market and you are wondering to choose a best one.You have searched for home subwoofer crossover in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home subwoofer crossover which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Car Home Amplifier Subwoofer Equalizer Crossover RCA Adjust Line Level Volume
Dimensions: 55 * 50 * 40mm
Color: Black
Conductor Material: Tinned Copper
Number of cores: 8
Jacket Material: PVC
The largest wire diameter: 7.5 (mm)
Two kinds of adjustment method: 1 by the gain adjustment, 2 through frequency adjustment.
Car Home Subwoofer Equalizer Crossover Amplifier RCA Adjust Line Level Volume Remote Amplifier Level Controller
Amazon.com
- This remote amplifier level control is used to adjust an amplifier's power level, stereo, equalizer or crossover volume form the dashboard or other remote locations
- 4 gold plated RCA's (2 RCA input & 2 RCA output)
- Level control knob, Frequency 150Hz - 40Hz, Gain 0db to -12db
- The car amplifier adds sub-woofer level controls or balances a multiple amplifier installation. Fine tunes the volume of any RCA line level signal you wish to control
Nippon HC-101 4 Ohm 1 channel 400w 120 Hz Low pass Subwoofer Crossover
Sold Each. Single Channel. 400 Watts Max 200 Watts Rms. Low Pass 120 Hz 4 Ohms. 12 Db/Octave Slope.
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
Amazon.com
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater
Amazon.com
- To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems
- Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 – 200 Hz +/- 3dB
- Output Impedance: 4-8 ohm
- Sub volume and crossover control knobs
- LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs.
Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!
Qianson 200W Pure Bass Subwoofer Crossover Second-order Crossover Frequency Distributor Divider 2 Way Speaker Audio Crossover Filter
Amazon.com
- Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY
- Power: 200W (applicable to 4-inch to 8-inch subwoofer).
- Speaker Impedance: 4-8 ohms.
- Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm
- 2-Way Crossover Filters Frequency Distributor
Product parameters:
Model: WEAH-90
Size: 8.0 cm long, 5.8 cm wide, 2.8 cm high.
Install diagonal holes: 6.2cm adjacent，angles: 5.0cm
Power: 200W (applicable to 4-inch to 8-inch subwoofer).
Impedance: 4-8 ohms.
Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY
Package included:
1 x Pure Bass Subwoofer Second-order Crossover Frequency Divider
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
Amazon.com
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers
- ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
TB20A TPA3116D2 Stereo Amplifier 2.1 Channel Class D Audio Amp with Subwoofer Volume Control 2x50W 1x100W Sub Output Super Bass Power Receiver, Treble Bass Independent Adjustment + Power Supply
Amazon.com
- Come with the 24V power adapter that can be carefully matched with this integrated amp physically as well as electrically. Unlike other amps come with a 12V power supply, The power supply is very important for a digital amp if you need clear sound !
- With subwoofer volume control, L and R channels Treble&Bass independent control, subwoofer frequency adjustment control.
- Adopt Texas Instruments TPA3116D2 * 2 chips, small simple compact design but practical and powerful, can drive 2-8ohm, 20-200Watts speakers
Nady CX-23SW 3-Way Stereo, Plus Subwoofer Crossover – Fits in a 19" Single Rack Space (1U) – For multi-amplifier setup
Amazon.com
- Splits stereo signals into 3 stereo bands (LOW / MID / HIGH) and a 4th mono band for the subwoofer. For use with 3-way speakers in combination with a subwoofer, the CX-23SW connects directly to the 3 speaker amplifiers and subwoofer via XLR connectors
- Phase inversion switches on the MID and HIGH bands allows driver phase adjustment, and low-cut subsonic filters provide low frequency driver protection
Subwoofer Amplifier Receiver 100Watt Mini Hi-Fi Digital Class D Integrated Stereo Audio Amp for Sub Bass + Power Supply TP-01
Amazon.com
- Come with 19V power adapter that can be carefully matched with this home mono integrated amp physically as well as electrically
- Adopt Texas Instruments TPA3116 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Built-in low pass filter,100W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
Quick tips:
1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.
Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.
Parameter:
1. Power supply range: 12v-24v;
2. THD: ≤ 0.04%;
3. Frequency Range: 20Hz – 120Hz (±1 dB);
4. SNR: ≥ 98dB;
5. Input sensitivity: ≤ 280mV;
6. Terminating impedance: 2Ohm – 8Ohm;
7. Output power: 100W for Subwoofer;
8. Input mode: 3.5mm audio input;
9. Power supply: 19V 4.74A 90W;
10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
FMOD Crossover Pair 70 Hz Low Pass
FMODs™ feature a 12 dB per octave crossover slope and are compatible with all RCA type input amps. Sold in pairs.
12V Low Pass Speaker Subwoofer Crossover for 8 Ohm or 4 Ohm
12V Lowpass Subwoofer or Speaker; Crossover for 12V Mobile Stereo Systems. 1 Crossover is good for 1 Speaker or Subwoofer. Handles 200 Watts RMS, 400 Watts Max. 120 Hz Low Pass. 12 db Octave Slope @ 4 Ohm.
