Best Interconnected Hardwired Under Cabinet Lighting

Nadair 22″ LED Direct Wire Dimmable Under Cabinet & Closet Lighting ENERGY STAR RATED, 3 Color Setttings Built in 1 Unit, Choose Your Favorite Color from 2700K (Soft White), 3500K (Warm White) and 4000K (Cool White), Aluminum Construction, 50,000 hours of LED life, direct line voltage (120V), ON/OFF switch + HIGH/LOW quick dimming, butt connector included, knockout (BX + LUMEX) included, installation hardware included, White finish, 610 Lumens, 11 watts, link up to 50 units to a single power supply

Product Description

This First Alert SA521CN Wireless Interconnected Hardwired Photoelectric Smoke Alarm is ideal for replacing an existing hardwired smoke alarm and then installing more compatible alarms for an interconnected safety network (additional alarms sold separately). Wireless technology makes it possible for the detector to connect with up to 18 First Alert enabled alarms, so when one sounds, they all sound. The photoelectric smoke sensor is designed to reduce false alarms from cooking smoke or shower steam while remaining sensitive to real danger. The alarm uses a loud 85-decibel siren, and the smoke detector has an integrated battery backup in case of power outages and features a single button to silence false alarms and test the unit.

Amazon.com

“The First Alert SA521CN-3ST (Model SA520B) Wireless Interconnect Integrated Smoke Alarm links the alarms throughout your home. This 120VAC hardwired wireless detector with battery backup integrates single alarms into a system. By adding Wireless Interconnect battery powered alarms elsewhere, when one alarm sounds, all alarms will be notified. Easily link alarms with the press of a button. The RF Interconnect technology continues to provide a reliable and secure radio frequency communication between Wireless Interconnect alarms. This technology features 915 MHz frequency with 65,000 security codes, and three (3) channel frequency hopping. The unit is compatible with an assortment of First Alert wireless alarms, which includes the SA501CN-3ST (SA501B), SA501CN2-3ST (SA501B2), SA511B, SA511CN2-3ST, SA520B, SA521CN-3ST, CO511B. SCO501CN-3ST (SCO500B), SCO501CN2-3ST. Photoelectric smoke sensor reduces nuisance alarms. Easy access battery drawer: no need to remove an alarm from the ceiling to change battery. Includes 10-year limited warranty. Meets UL standards. Note: This product is intended for non-professional do it yourself installation. If you would like information about a professionally installed and monitored system, please contact First Alert Professional at 1-800-921-6025. First Alert Professional is not affiliated with BRK Brands, Inc. “

See your home in the best possible light with a GE-branded Premium Linkable Light Fixture. This energy-efficient fixture is the ideal solution for any room in your home, adding light wherever extra light is needed. With the ability to link 30 fixtures while only using a single outlet, get the perfect amount of light for any size room. In addition to being able to plug into an outlet, the light can be wired directly to a wall switch using the optional GE-branded Direct Wire Junction Box to eliminate visible cords.

To achieve stylish accent lighting in moments, simply mount the light underneath or on top of kitchen cabinetry, shelving or bookcases using the keyhole slots located at the end of each fixture. In smaller enclosed areas, such as closets and pantries, use the lights to illuminate hard-to-see corners — the light’s slim design makes it convenient to place in locations with limited space. The toggle switch makes it easy to operate, allowing you to choose between high and low settings, as well as turn the light off. Make life a little brighter with a GE-branded Premium Linkable Light Fixture.

We stand behind our Products 100% If you have any issues with your Driver or lights Make sure to test the Driver before installing all of the lights on a Job and call us immediately to replace any needed parts.

The Pro Series 21 LED Panels are ideally suited for under the cabinet task lighting applications, kitchen lighting, jewelry lighting, decorative lighting, and reading lighting. Light panels are sold individually, in panel packs, or kits and can be mixed and matched to create a system.

Unlike our other kits, the Hardwire Kitchen Kit allows you to hardwire a dimmable transformer to a wall dimmer and your Inspired LED lights in order to easily control your kitchen lighting.
The Hardwire Kitchen Kit includes:
(10) 21 LED Panels
(1) 40 Watt Magnitude Lindrive Dimmable Transformer
(1) Lutron Diva Wall Dimmer in White
(11) Interconnect Cables- 10-3’ cables.
(10) Cable Clamps and Screws
Panel Dimensions:
8.75” x 0.050” x 0.30”

Each LED panel has two adhesive pads with screw mounting.

— Cabinet Lamp Features:
If you are bothering to find remoted controller or dimmer once you are cooking in busy? If so, we have the Excellent solution for you:The touch Sensor LED Under Cabinet by Night pearl, you just directly control the light by your finger.

1. Touch dimming, you figure touch the sensor section areas, you can have two choices to select your favorite brighntess.

IF put your figure on the marked sensor section,do’t leave. lighting can be softy adjusted till max brightness or min brightness.

IF you touch the marked sensor section, light will turn up or down 5% each time.Min 75lm can be used as night light,Max 1200lm.the lighting brightness status will be memoried in the last brightness status till you touch again.

IF Likable, Yeth

— Easy Installation:

Two installation methods are optional: 1st, you screw the clips into wall or areas,you push the lamp into clips,2nd,Using 6pc powerful 3M stickers onto place,a no-damage options.
— Specification:
Power:12W of a set, 4W per strip
Dimension: 11.8×4.9×0.8 intch
Input Voltage: AC100V~240V 50/60Hz
Output Voltage:DC 12V
Adaptor+output wires Length: 39.37 intch
Luminious Flux: Max 1200lm
Light Color (CCT): 4000K
CRI :> 80RA
LEDS: 2835
Materials Body: 6063 Oxioded Alu + Milky PC

— Packing Assessories:
1. Lamps: X 3PC (1PC With Sensor, The other without Sensor
2. 3M Double Face Table: X 6PC
3. Reccessed by Clips,304 steel: X 6PC
4.Wires: X3PC
5.Adaptor: x 1 PC
6.Plugs: X 6 PC
7.Plastic Wire Clips: X 3PC
8. Weight: NW: 13.4 OZ (3pcs)

— Note:
1. It’s powered by commonly available DC12V adaptor, so it’s not chargeable and no battery required. A UL listed adaptor included in package.
2. Turn on/off and dim brightness by dimmer mark on surface,it’s not working with other external dimmer.
3. this strip is linkable.

10 pcs Super Bright 0.5m 7020 Led rigid strip white for cabinet counter bar
Specifications:
Color: White
Led type : 7020
View angle:120°
Working Voltage: 12VDC
LED Quantity: 36 leds/ 0.5M,total 10 x 36pcs leds
Size: 50cm x 1.2cm /19.69inch x 0.47inch.
Working Temperature:-20 to 50°
Protection: NO-Waterproof
LED strip PCB:Aluminium
Lifespan: 50,000 hours
2 years warranty

Applications:
Interior design, such as decoration of home, hotel, KTV, bar, disco, club etc.
Architectural design, such as Decorative lighting of buildings, edge lighting decoration etc.
Advertisement project, such as Outdoor illuminated signs, billboard decoration etc.
Display design, such as decoration of drinks cabinet, shoe cabinet, jewelry counter etc.
Underwater lighting engineering, such as decoration of fish tank , aquarium, fountain etc.
City beautification, landscape design, holiday decoration and so on.

Package Content:
10PCS X 0.5M Hard LED Strip Light

Under Cabinet Lighting Features:
Energy Saving & Super Bright
Each LED light bar is 400lm, the whole set is 12W, 1200lm, save 85% of energy. Perfect for cabinets, kitchens, desks, shelf and any dark corners which need lights.

Touch Control & Memory Function:
Touch switching on/off and 5%-100% dimmable by figure touching time, you can easily set up brightness as you like. With memory function, it will automatically remember your last brightness setting, no need to adjust brightness every time. Min 75lm can be used as night light,Max 1200lm.

Easy Installation:
The kitchen cabinet lighting can be connected by the included interconnect USB cables or connector. Install in minutes by yourself. All installation accessories included. You can mount it by simple screws or double sided tapes ( a no-damage option)

Specification:
Power: 12W Total
Luminious Flux: Max 1200lm
Light Color (CCT): 4000K
Output Voltage: DC12V
Input Voltage: AC100V~265V
Dimmable Range: 5%-100%
Dimension: 10.9 x 0.9 x 0.4 inch
Materials Body: 6063 Aluminum + Milky PC

Packages:
3 * LED Under Cabinet Lighting(1PC With Touch Sensor)
1 * DC12V UL listed power adaptor
3 * Interconnect cables
3 * Mounting connectors
6 * Stainless Clips
6 * 3M Double Sides Tapes
6 * Screws
6 * Screw caps
1 * User manual

Warning TIPs:
1. It’s powered by commonly available DC12V adaptor, so it’s not chargeable and no battery required. A UL listed adaptor included in package.
2. Turn on/off and dim brightness by dimmer mark on surface,it’s not working with other external dimmer.
3.The light bar with touch sensor mark must be the first connection with the adapter

The Kobi Electric under cabinet LED fixture offers a lighting solution to those Dark spaces beneath cabinetry. The low profile design and substantial light output make this product perfect for home or office use. With the ability to join together in series, this new fixture Works even under long stretches of cabinetry.