mixonelife 
Nowadays, there are so many products of kitchen counter brackets in the market and you are wondering to choose a best one.You have searched for kitchen counter brackets in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings kitchen counter brackets which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
4 Heavy Duty Black Steel 6”x8” Countertop Support Brackets Corbel Lot L Shelf
Amazon.com
- Exact Dimensions: 8" x 6" x 2-1/2" Wide (does not come with screws,please purchase screws according to your requirements )
- Holds up to 500 lbs.Steel construction Black powder coat finish
- Use for quartz, granite and other countertop applications
- They work well in supporting counter tops and many other applications. Note that the 8" side is designed to go under the counter, so your overhang should be between 8.5" & 12".
Homydom Complete Sink Repair Kit System – Never Fall Undermount Sink Installation Kit-Sink Bracket for kitchen,Silver
Amazon.com
- GREAT CAPACITY - Each package has 5 adjustable rods,1 Allen Key and all the screws necessary, heavy duty brackets with 680 lbs.
- STURDY HEAVY DUTY STEEL - Galvanized steel and epoxy painted, undermount sink brackets are built tough to ensure durability!
- ADJUSTABLE - The angle of bracket head/hinge could swivel to any desired angle.
- EASY TO ASSEMBLE - Not need to remove any plumbing at all
- Just use your thumb turnbuckle with the Allen key to secure the stud in place, it will work.
Kitchen Island Support Bracket (30 Inch)
Amazon.com
- steel
- Made in the USA with 1/2" thick by 2.5" wide Solid American Steel
- Virtually invisible, gives your Island the appearance of floating.
- Non-intrusive. No corbels needed. No knee knocking.
- Easy to install, economical way to protect your countertop investment.
- Free Ground Shipping ..... Limited Lifetime Warranty
The Hidden Island Support Bracket is made of ½ inch thick by 2 ½ inch wide American steel with a flange on the end. This flange has ¼ inch holes on each end. The flange is what will be mounted to the front inside cabinet wall. The bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet. This bracket is powder coated black. We recommend spacing your brackets 20 inches apart for maximum countertop protection. This is for one (1) bracket only.
4 Heavy Duty Black Steel 6" x 8" Countertop Support Brackets! Corbel L Shelf
Amazon.com
- 4 pack Countertop brackets for Quartz, Granite, Concrete, etc
- Holds up to 500 lbs
- Dimensions: 8" X 6" X 2 1/2" Wide 3/8" Thick
- Low profile floating look countertop bracket design Use on Quartz, Granite, wood, concrete, laminate, etc
- 100% guaranteed with lifetime free replacement warranty
FOUR (4) brackets!!!
Super Heavy duty
STEEL METAL bracket
Powder coated black finish
Low profile floating look countertop bracket design Use on Quartz, Granite, wood, concrete, laminate, etc
Holds up to 500 lbs.
Dimensions:
8″ Side without holes, designed to go under the counter
6″ 3 hole side
2 1/2″ Wide
3/8″ Thick
Comes with 2 1/2″ long #14 (1/4″) screws
The 8″ side is designed to go under the counter, so your overhang should be between 8.5″ & 12″
IN-STOCK IN USA AND WILL SHIP WITHIN 24 HOURS
QualityDMAX product
Undermount Sink Clips – Undermount Sink Brackets, Supports – Epoxy Sink Clips – 10 Pack Kit – Kitchen Sink Clips – Sink Clips – Undermount Kitchen Sink Clips
Amazon.com
- PERFECTLY SECURE YOUR SINK: Sink clips provide stability to anchor any undermount sink in place! Use On Undermount Kitchen Sinks & Undermount Bathroom Sinks.
- EASY TO INSTALL: NO DRILLING or SCREWING into countertop or cabinets preventing any chance of damaging, cracking or splitting. No special tools needed.
- FULLY ADJUSTABLE AFTER INSTALLATION: You can adjust the positioning of the epoxy sink clips both vertically and horizontally to ensure the best results!
10-Pack Epoxy Sink Clip Kit- Use with sinks made of any material & install on any countertop material
Looking to remodel your kitchen or bathroom with a brand new undermount sink? Undermount bathroom sinks and undermount kitchen sinks don’t have to be expensive or difficult to install when you don’t have the right hardware. With E-Z Sink Clips Undermount Sink Clips, you can get bathroom and kitchen sinks undermount fixtures perfectly secured fast!
E-Z Sink Clips Undermount Sink Clips are universal undermount kitchen sink clips and bathroom undermount sink clips that are quick and simple to use. The unique design of our undermount sink brackets allows them to be installed without the need for drilling or using special tools, preventing any chance of cracking or splitting the countertop. The mounting bracket for sink works on single bowl or double bowl sinks and with just the everyday tools already in your toolbox, you can get these sink clips in place and your sink safely secured!
To make EZ Sink Clips Undermount Sink Clips even simpler to use, we’ve designed our bathroom and kitchen sink clips to be fully adjustable. You can adjust the positioning of each undermount sink bracket to the precise angle to ensure proper installation on any sink you desire! Plus, our epoxy sink clips are constructed out of durable materials to stand the test of time.
With EZ Sink Clips Undermount Sink Clips, you get a total of 10 sink clips for undermount kitchen sinks and undermount bathroom sinks for one great low price. Your purchase is backed by our lifetime money-back guarantee, so you can order with complete confidence that you’re getting the best bathroom and kitchen sink clips on Amazon.
Instructions on back of cardboard header.
LIFETIME GUARANTEED: Our undermount sink brackets are built tough to ensure durability!
Undermount Sink Clips Kitchen Bathroom Under Mounted Washbasin Clamps Bracket 10 Pack by Maydusa
Amazon.com
- Made from solid zinc plated steel and brass material
- Usually 10 clips are enough to support a sink
- To convert self rimming to under counter mount sinks
- Put the clip into pre drilled countertop or cabinets
- Fully adjustable after installation
Folding Shelf Brackets, Heavy Duty Metal Triangle Shelf Bracket, DIY Bracket Folding Shelf Hinge Wall Mounted, Max Load: 150lb, for Table Work Bench Space Saving, Pack of 2 (12 Inch)
Amazon.com
- STURDY & DURABLE - The Folding Shelf Bracket is made of high-quality metal which ensures the durability and hard-wearing. Black painted surface, build to resist daily scratches, corrosion and tarnishing.
- SPACE SAVING - The hinges lock at 90 degrees. When you want to collapse the table simply press the release arm. Excellent performance suitable for limited spaces when you want a work surface that can be folded down and out of the way.
Hidden Countertop Support Brackets 15" Steel L-Bracket
Amazon.com
- steel
- One - (Pick your size ") L x 2.5" W x 1/2" Thick Solid American Steel Bracket in Black on the horizontal piece
- Vertical Tang is 1/4" thick, 2 1/2" wide and 6" Long (do not count vertical in measurements)
- Screw Holes Countersunk for Flush installation. Read description below fully
- Beveled Edge for Safety.
- Strongest on the Market Made in USA. Do not be fooled by imitators!
For countertop installation mounted over a knee/pony wall, then into each stud on the knee/pony wall, to secure the weight of the countertop. If no knee/pony wall, then a 2×6 must be mounted inside the cabinet and the L Bracket attached spacing every 20".
**Not for use in any other application than that listed.
When determining the size: bracket is sized in length tip to tip horizontally; for example, a 9" bracket is 9" tip to tip horizontally. Do not include the 6" vertical piece when determining the size to order.
Tip on determining length: stay away from outer edge of your countertop 3" and do not forget to add in the thickness of the knee wall, pony wall, or the 2×6 inside the cabinet. For example, only: a 12" countertop overhang, plus 4" knee wall, equals 16", minus 3" outer edge, would mean you would order a 13" L-Bracket.
Made of ½" thick by 2 ½" wide American steel on the horizontal piece and the vertical piece [tang] is made of ¼" by 2 ½" x 6" long wide American steel powder coated. This is for one (1) bracket only
4 Black Steel 6”x8” Countertop Support Brackets Mantel Corbel Lot L Shelf
YUMORE Folding Shelf Brackets 12”, Max Load: 330lb Heavy Duty Stainless Steel Collapsible Shelf Bracket for Table Work Bench, Space Saving DIY Bracket, Pack of 2
Amazon.com
- Sturdy & Durable - The Folding Shelf Bracket and the fitting screw is constructed of Type premium grade stainless steel. High-quality brushed stainless steel, build to resist daily scratches, corrosion and tarnishing. Allowing it to remain looking its best for longer. The paint bracket is the iron with the Paint. Once the surface Paint was destroy, it is easy rusting. The Brackets painting process it is easy polluted environment. And bad for you health when the bracket use near heat.
YUMORE Folding Shelf Bracket can make your home more clean and tidy after you place a piece of wood board on this Brackets.
Meanwhile, it can bring artistic feeling to your house. The hinges lock at 90 degrees. When you want to collapse the table simply press the release arm.
Excellent performance suitable for limited spaces when you want a work surface that can be folded down and out of the way. Helps keep your room organized.
These folding brackets are ideal for many do-it-yourself jobs around the house. You can use steel Folding arms to built a collapsible bench on your backyard fence for additional seating;
Use to make a collapsible table for your room; Installed a folding counter in your BBQ trailer; Build a table that folds up from the wall,and so on.
SPECIFICATIONS
-Product Name : Folding Shelf Bracket
-Material : Stainless Steel
-Thickness : 1.57 inch
-length, width : 12 inch x 10
-Finish : Brushed Steel
-Installation Method : Screw fixing
-Color : Silver Tone
-Hole Quantity : 6 Holes
-Bracket Size : 330lb/150kg
Package Content :
2 x L Brackets
8 x Screw
8 x Plastic expansion Anchor
Warm Attention– There is no wood board included.And it is recommended that the width size of the wood board should not exceed 4 inch of the stainless steel bracket .
Ekena Millwork BKTW01X06X09THRW Bracket, 1 3/4"W x 6 1/2"D x 9"H, Rubberwood
Amazon.com
- Hand carved in alder, cherry, maple, red oak, or paint grade wood
- Wood shelf brackets are fully sanded and take paint or stain easily
- Ideal for countertops, bars, shelves, kitchen islands, range hoods, and more
- Carved wood shelf brackets offer both support and decoration
- Most brackets and corbels have the same style in multiple sizes
- Bracket installation is a breeze with wood glue and nails or screws
2-Pack Undercounter Dishwasher Bracket Replacement – Whirlpool -Compatible – Compare to 8269145 / WP8269145 – Replacement Dishwasher Upper Mounting Bracket
Amazon.com
- IDEAL FIT FOR MANY MODELS: Our brackets are a perfect fit for an array of Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) models, among others
- COMPARABLE TO OEM PARTS: Our dishwasher mounting brackets / undercounter dishwasher brackets are made from high-quality galvanized steel and are durable, robust, and made to last
1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.
