mixonelife 
Nowadays, there are so many products of loose subwoofer for home audio in the market and you are wondering to choose a best one.You have searched for loose subwoofer for home audio in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings loose subwoofer for home audio which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Theater Solutions SUB8S 250 Watt Surround Sound HD Home Theater Slim Powered Active Subwoofer (Black)
Amazon.com
- Theater Solutions SUB8S slim 4.75" height design fits under most furniture, 250 watts peak power, frequency response is 35Hz-150Hz, 24dB per octave crossover, 8ohm impedance
- Built in digital drive high efficiency amplifier, 8" high efficiency low frequency down firing transducer, L/R RCA inputs, high level L/R input and output spring terminals
- Variable 35Hz to 150Hz control knob, gain control knob, 0 or 180 degree phase switch, built-in auto shut off, bottom slotted bass port, black ash finish
This Theater Solutions by Goldwood powered floor subwoofer is newly designed for consumers who demand extra powerful bass for their home theater experience. High quality, lush bass and a full bodied sound at an affordable price. This speaker is perfect playing movies or mega bass rap music. Made with only the highest quality, moisture resistant materials to deliver unsurpassed sound in any listening environment. Sophisticated design and measurement equipment, including computer assisted design software were used to design this powered subwoofer to achieve an optimized balance and interface between components to give better quality performance and longer life. This slim versatile sub comes with stands to set up in any area, a mounting bracket to attach to a wall or the slim 4 3/4″ height can slide under most furniture. The specially built in cabinet amplifier has high level left/right spring terminal inputs. The 24dB per octave crossover is continuously variable from 50-150Hz. This powered sub also has a built-in auto shut off. If two minutes goes by and sub does not receive a signal it switches to stand-by mode to conserve power. Volume and crossover frequency dials round out the special features on this super powerful subwoofer. The 8 inch long throw bass woofer has a frequency response of 35-150 Hz +/- 2dB. The port design smooth’s air flowing in and out of the cabinet, reducing turbulence and port noise. The ports also increase linearity, lowers distortion, reduces 5th order harmonic distortion and provides an increased output as high as 2-3dB. A black wood finish, cabinet feet, 115 AC cord, included RCA cables, RCA “Y” adapter, stand mounts and hanging mount with mounting screws round out this subwoofers fantastic details.
Fosmon HD8005 [3-Gang 6.1 Surround Distribution] Home Theater Copper Banana Binding Post Coupler Type Wall Plate for 6 Speakers, 1 RCA Jack for Subwoofer & 2 HDMI Ports
Amazon.com
- [COMPATIBLE WITH 4K@30Hz] Fosmon’s 3-Gang 6.1 Surround Sound Distribution Wall Plate is compatible with 4K@30Hz for your high-resolution needs.
- [GOLD-PLATED HIGH-SPEED CONNECTORS] This wall plate has gold plated connection for improved quality and performance.
- [CLEAN CONNECTION POINT FOR YOUR A/V EQUIPMENT] Wire your house cleanly and efficiently for audio/video with this HDMI wall plate from Fosmon. Remove cable clutter by hiding cables in your walls.
Dual Channel Mini Portable Stereo- Receiver Box – 300 Watt Rack Mount Audio Speaker Power Amplifier System w/ 3.5mm Input – Enjoy Amplified Sound for Your Home Entertainment System – Pyle PLMPA35
Amazon.com
- 300 WATT POWER: The Pyle Mini Sound Amplifier gives your home theater entertainment system a boost! Offers low distortion and acoustically accurate audio reproduction. Supports speakers w/ 4 ohm impedance allows you to enjoy high quality audio
- SWITCHABLE FILTER: This dual channel 12V home studio amplifier features an easy switch for low and high pass filter which allows higher frequencies to pass through the filter for high pass and lower frequencies for low pass
BOSS Audio BV9364B Car Stereo DVD Player – Double Din, Bluetooth Audio and Hands Free Calling, 6.2 Inch Touchscreen LCD Monitor, MP3 Player, CD, DVD, USB Port, SD, AUX Input, AM/FM Radio Receiver
Amazon.com
- BLUETOOTH: Answer Calls with Just One Push of a Button. Make Calls and Be Hands-Free with No Distractions. No Need To Hold Your Phone Ever Again. You Can Also Play and Control Your Music and Apps like Spotify / Pandora wirelessly.
- MEDIA PAYBACK: Watch Your Choice Of Videos Through The DVD Player, Play Music Through Your Bluetooth Device, Pop In A CD Or Use The USB And SD Ports For More Audio Alternatives. Tune Into The AM/FM Radio Stations For Up To Date Music/News/Sports And more
ButtKicker BK-LFE Low Frequency Effects System
Amazon.com
- Offers true infrasonic, or low-frequency response with a resonant frequency of 9 Hz
- Attaches to seats and floors, and sends low-frequency sound directly into the listener's body
- Accurately reproduce the feeling range of many natural and man-made sounds
- Power handling ranges from a minimum of 400 watts to a 1,500-watt maximum
- Measures 5.375 x 5.5 x 5.375 inches (WxHxD), and weighs 11 pounds
Cable Concealer Management Raceway Kit – UMTELE 10 White Cable Channels – Cable Cord Hider Kit to Hide Wires for Wall Mount TV, Offices and Computers – 15.7 X 0.91 X 0.51 Inch(LWH)
Amazon.com
- Wire Hider Cable Management Kit: With this cable management system, helps you to manage all your cables and wires, hide unnecessary &
- clutter electronic cords and cables, keep room clean and neat. This is exactly what you need to solve thorny cable problems
- Quality PVC Raceway Channels: High strength and sturdy PVC cable raceway can be cut to the length you want, not too long or too short. Easy to slide cord covers and never get stuck. You can also paint on the cord channel r to match the color of your wall
Acoustic Audio R191 in Ceiling/in Wall 5 Speaker Set 2 Way Home Theater 1000 Watt New R191-5S
Amazon.com
- Acoustic Audio R191 in ceiling 2-way speakers, recommended power is 20-200 watts per speaker, frequency response is 45Hz-22 kHz, efficiency is 95dB, 8ohm, 2-way design and functionality
- 5.25" woofers with high rigidity polypropylene cones and extended throw assembly, butyl rubber surrounds for increased performance and durability, 12mm soft dome tweeters
- Paintable frames and grills, low profile housings designed for easy installation, integrated wall-lock mounting system, cut-out templates included for easy installation
Specifications
Acoustic Audio R191 Specialty Series In Ceiling 2-Way 5 Speaker Set
Recommended Power: 20-200 Watts per speaker
Frequency Response: 45Hz-22 kHz
Efficiency/Sensitivity: 95dB at 1 watt 1 meter
Crossover Frequency: 2200Hz
Impedance: 8 Ohm
2-Way Design and Functionality
5.25″ Woofers
High Rigidity Polypropylene Cones with Extended Throw Assembly
Butyl Rubber Surrounds For Increased Performance and Durability
12mm Soft Dome Tweeters
All Weather Design For Indoor And Outdoor Use
Paintable Frames and Grills
Low Profile Housings Designed For Easy Installation
Integrated Wall-Lock Mounting System
Cut-Out Templates Included For Easy Installation
Cut Out Size: 6.625″ per speaker
Overall Size: 7.625″ per speaker
Mounting Depth: 3″ per speaker
Designed And Engineered In USA
Full Instructions Included
Applications:
Home Entertainment In-Wall/Ceiling Speakers
Home Audio Surround Sound
Center Channel Speaker
Sunrooms or Atriums
Patios or Pool Decks
Spas and Garden Areas
Home Theaters or Cinema Rooms
Bathrooms or Kitchens
Boats or Yachts
Open-Top Vehicles
Offices or Commercial Use
This Listing and Price is for 2.5 Pair / 5 In Ceiling or In Wall Speakers
Fairfield PF16B Poly-Fil Premium Polyester Fiber, 16 Oz, White
Absolutely the best performing fiberfill for pillows, dolls, stuffed toys and crafts. Crafters have made Poly-fil Premium Polyester Fiberfill the best selling polyester fiberfill in America. A unique process explodes the special blend of 100-percent recycled polyester fibers creating an extraordinary resilience that maintains its integrity through countless launderings. Use for all types of craft and home décor projects.
Skar Audio IX-10 D2 10" 400 Watt Max Power Dual 2 Ohm Car Subwoofer
Amazon.com
- 10-Inch Dual 2-ohm Car Subwoofer
- Peak Power: 400 Watts | RMS Power: 200 Watts
- 2" BASV Premium Voice Coil | Advanced Air Flow Cooling Design
- High Strength Pressed Paper Cone and Foam Surround
- Frequency Response Range: 28 Hz - 325 Hz | Sensitivity: 86.2 dB
- Subwoofer Mounting Depth: 4.85"
Skar audio developed the ix series 10-inch subwoofers to be the most powerful, affordable, and reliable drivers in their power class. The ix series is the perfect solution if you’re looking for a price friendly, affordable, and clean subwoofer setup in your vehicle. Featuring a single slug premium ferrite magnet, combined with a two-inch high quality voice coil, the driving force behind this conservatively rated woofer line raises industries standards in what to expect out of a driver in this class. This ix subwoofers were designed to be both extremely efficient as well, and work great in both vented and sealed applications. Conservatively rated and built like all of our other subwoofer products, only the highest-grade components are used in the assembly of the ix drivers. Dual 2 ohm voice coil. RMS power : 200 watts, max power : 400 watts, fs : 35.7 Hz, re : 4.0 Ohms, SPL : 86.3 Db, QMS : 6.41, QTS : 0.55, QES : 0.6, RMS : 3.0 Kg/s, CMS : 0.23 Mm/n, mms : 86.4 G, NREF : 0.27%, BL : 11.4 Na, vas : 37.2 L, le : 32.6 MH, XMAX: 6mm one-way.
Acoustic Audio HD726 in-Wall/Ceiling Home Theater Surround 7.2 Speaker System
Amazon.com
- Acoustic Audio 9 piece home speaker 2-way set, 4 hd-650 wall speakers, 30hz-22 kHz, 98dB, 2 hd-6 ceiling speakers, 32hz-22 kHz, 98dB, 20-300w per speaker, 8ohm, 6.5" Woven fiber bulletproof woofers
- Butyl rubber Surrounds, pivoting titanium tweeters, Rectangular cut out 7.375" X 10.75", overall 8.875" X 12.25", depth 3", round cut out 7.875", overall 9", depth 3.25", low profile housings
- Hd-6c wall center Channel 3-way speaker, 20-350 watts, 33hz-22 kHz, two 6.5" Woofers, 12mm soft dome tweeter, cut out is 19.25" X 7.5", overall is 20.5" X 8.75", depth: 3.25"
Acoustic Audio by Goldwood high definition Series HD726 7.1 in-wall/ceiling speaker system. This system is perfectly matched and consists of: (4) rectangular front in-wall HD speakers, (2) round rear in-ceiling HD speakers, (1) dedicated True Center channel in-wall HD speaker and (2) 10″ In-wall HD subwoofer. This is the ultimate entertainment package to build your very own home theater surround sound system. The speakers mount seamlessly into any wall or ceiling, so they won’t take up precious shelf or floor space. Each speaker has been designed to provide the best sound quality. The entire system can handle 2, 750 watts of power and features authentic 6.5″ Kevlar cones, butyl rubber Surrounds and titanium tweeters. Installation is easy because of the speakers’ Quick-turn mounting arms. The grills are White and can be painted to match specific decor. Speaker wire is included.
Behringer Super-X Pro CX2310 Professional High-Precision Stereo 2-Way/Mono 3-Way Crossover with Subwoofer Output
Amazon.com
- Professional stereo 2-way/mono 3-way crossover featuring state-of-the-art Linkwitz-Riley filters with 24 dB/octave
- Additional subwoofer output with independent Frequency control
- Absolutely flat summed amplitude response, zero phase difference
- Individual output Gain controls for all bands
- Individual output Mute switches for easy band adjustment
BEHRINGER SUPER-X PRO CX2310
High-Precision Stereo 2-Way/Mono 3-Way Crossover with Subwoofer Output
- Professional stereo 2-way/mono 3-way crossover featuring state-of-the-art Linkwitz-Riley filters with 24 dB/octave
- Additional subwoofer output with independent Frequency control
- Absolutely flat summed amplitude response, zero phase difference
- Individual output Gain controls for all bands
- Individual output Mute switches for easy band adjustment
- Individual Phase reverse switches for instant phase correction
- Switchable 25 Hz Low cut filter on each input for low-frequency driver protection
- Servo-balanced and gold-plated XLR connectors for all inputs and outputs
- Individual Phase reverse switches for instant phase correction
- Switchable 25 Hz Low cut filter on each input for low-frequency driver protection
- Servo-balanced and gold-plated XLR connectors for all inputs and outputs
- Ultra-high precision potentiometers for ultimate accuracy and repeatability
- Illuminated switches for secure operation in dark stage environments
- Shielded toroidal mains transformer for minimal noise interference
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The CX2310 2-way stereo/3-way mono crossover features absolute precision, state-of-the-art circuitry, with superior-grade components, ultra low-noise op amps and balanced inputs and outputs. Additionally, the CX2310 provides an independently adjustable subwoofer output, effectively providing an extra low-frequency band, which is adjustable from 10 Hz to 235 Hz.
Sound Quality
When a sound system is tuned properly, it becomes powerful, balanced and efficient. Bass content is punchy and tight, with vocals and instruments that are rich, crisp and well defined. The CX2310 crossover’s accurate signal processing protects critical loudspeaker components and improves overall system efficiency.
What’s a Crossover?
Chances are if you’re reading this, you already know what a crossover is and you know that you need one. But if you are new to multi-way PA systems, here is a brief overview.
Loudspeakers (which we call transducers) convert electrical signals into sound waves. And no matter how well a transducer is designed and made, it simply cannot reproduce the entire audio spectrum all by itself. Low-frequency sounds tend to push a transducer to its maximum, making it impossible for that same transducer to reproduce the treble content with the sound quality it deserves. (Try singing high falsetto next time you’re bench-pressing your limit!)
That is why high-quality sound systems use multiple speakers (woofers and tweeters) to share the work. When the woofer (usually the larger transducer) does all the heavy lifting, the tweeter can easily handle the high-frequency stuff. Three- and four-way systems distribute the work even more, allowing the individual transducers to reproduce the frequency range they are best suited to. It is the crossover’s function to divide these tasks between the various transducers.
Divide and Conquer
The CX2310 provides two modes of operation: 2-way stereo, for left and right Lows (woofers) and Highs (tweeters); and 3-way mono, for Lows, Mids and Highs. In either mode, there is an additional output provided for a mono subwoofer with its own frequency range and level controls. This extra feature effectively turns the CX2310 into a stereo 2-way + mono 1-way, or a mono 4-way frequency crossover. The subwoofer signal is presented in mono, since people tend to perceive really low bass frequencies as coming from all directions.
By using 1% metal film resistors, along with other extremely tight-tolerance components, the CX2310 is able to guarantee surgically precise frequency selection with incredibly low thermal noise. State-of-the-art, ultra low-noise op amps ensure super-quiet operation. CX3400’s elegant LED matrix shows at a glance which operation mode is selected and which controls are active.
Getting Connected
All of the inputs and outputs accept balanced and unbalanced XLR connections. The inputs feature 25 Hz Low Cut filters for low-frequency driver protection. Mute and phase invert switches are provided for each frequency range, making troubleshooting an entire loudspeaker system a breeze.
Value
Stop by your authorized BEHRINGER dealer today and demo the CX2310, the super-affordable way to optimize the performance of your sound system.
RCA Cable,GREATLINK 2RCA Male to 2RCA Stereo Audio Cable Gold-Plated Compatible with Speaker, AMP, Turntable, Receiver, Home Theater, Subwoofer (10FT)
Amazon.com
- Crystal Clear Audio 2 RCA output (connect to either L or R input) and 2 RCA input
- input can be high frequency (digital audio) or low frequency (subwoofer)
- Left & Right 2-Male to 2-Male RCA audio cable enhances audio connections
- ideal for home-entertainment and high-fidelity (HiFi) systems
- 24K Gold Plated Connectors: 24k gold plated connectors which protect the cables from corrosion and solid RCA connectors.Not worry about the connectors loose issue.
RCA Male to Male Gold Stereo Audio Cable
RCA Stereo Audio cables are excellent for connecting your Stereo, DVD, HD-TV, and all other home theater audio involved equipment. These high performance gold contact cables are colored for easy installation and identification of left and right channels and are 100 percent shielded offering superb protection against EMI/RFI interference.
Specifications & Features:
Connectors: 2 Male RCA to 2 Male RCA
Gold Contacts for high performance
Shielded to prevent EMI/RFI interference
Designed to connect RCA audio devices
Black 2.8mm OD PVC Jacket
Fully Molded Construction
Color-Coded Red-White/Red-White or Black-Black
AWG26 Stranded Copper Center Conductor
Lifetime Warranty
Cable length: 10 Feet
Incredibly Durable – with a 10000+ bend lifespan several times longer than original audio cables, flexible cord, this cable really is made to last.
