Experience the vibrancy of our home sound system. A great sound system relies on a great amplifier–they’re an integral element to a full soundscape. Create a multi-room audio environment, build a home theater, or expand your system to the outdoors. Our gold standard Class A amplifiers will fit your every need. This Power (A) AMP100VS system has 2 channels rated at a power output of 50 watts into 8 ohms. It has a power output of 60 watts RMS per channel into 4 ohms. 150 watts are bridged to an output at 8 omhs. Born out of Portland, Oregon, AudioSource began designing and manufacturing high-grade, affordable, and great sounding audio products in 1978. Our goal is to exceed your expectations for value and performance. Specifications: Input Sensitivity: Variable, .7 Vrms for rated power at 8 ohms. Frequence response: 10Hz to 30kHz. Channel Crosstalk: 70 dB. Less than 0.2% THD into 8 ohms at rated power. S/N Ratio: 100 dB A-weighted.

Quick tips:

1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.

Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.

Parameter:

1. Power supply range: 12v-24v;

2. THD: ≤ 0.04%;

3. Frequency Range: 20Hz – 120Hz (±1 dB);

4. SNR: ≥ 98dB;

5. Input sensitivity: ≤ 280mV;

6. Terminating impedance: 2Ohm – 8Ohm;

7. Output power: 100W for Subwoofer;

8. Input mode: 3.5mm audio input;

9. Power supply: 19V 4.74A 90W;

10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.

Product Description

The PCA3 mini stereo power amplifier from Pyle provides up to 75W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks. It’s compatible with any audio or computer device–you can even hook up an iPod using a 3.5mm to RCA jack converter. A master volume control on the front lets you adjust the gain, and treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. The PCA3 runs on 110V or 220V with a voltage selector switch.

From the Manufacturer

Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

Back View
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 75 Watt to handle all your audio needs.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

Compatibility

Compatible with CD players, walkmans, and computerized devices, including MP3s, via 3.5 millimeter to RCA converter.

RCA L/R Line Input

Lets you connect the desired line input source.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier.

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20 millimeter fuse –not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 75 Watt RMS at 4 Ohm
• Blue LED Output Level Display
• Frequency Response: 20 Hz-40 kHz
• Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20 millimeter)
• Power Requirement: 120 V AC 50 Hz/230 V AC 50 Hz
• Tone Controls: Bass and Treble: +/-10dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inch (190 x 70 x 137 millimeter)

Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!

Parameters:

• Audio input: 3.5mm
• Audio output: Banana plug
• Power supply: DC 8-25V; at least 3A
• Maximum power: 100W
• Chip: TPA3116D2 + NE5532
• Weight: 0.35Kg; 0.2Kg (without package)
• Dimensions: 68.5 * 33 * 90 mm (not including terminals)

Packing List:

• 1 * amplifier

Pyle Model : PTA62BT

Bluetooth Home Audio Source Amplifier

Bluetooth Home Audio Amplifier, 6-Ch. Audio Source Stereo Receiver System with FM Radio, MP3/USB/SD/AUX Playback (750 Watt)

Features:

Bluetooth Connectivity:

What’s in the Box:

Technical Specs:

This 750-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won’t find this amplifier lacking. It features a built-in FM radio with digital LCD display. It’s equipped with RCA inputs on the back and two ¼” mic jacks on the front, so you can turn this amp into a karaoke machine – even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. Remote is already included. Runs on 110 and 220 V AC.