Best Russound Whole Home Audio

The CA4 system is an affordable four-zone, four-source multiroom system. Share your music anywhere in your home, at the touch of a button.

Enjoy your favorite albums in the kitchen and living room while satellite radio plays in the den.

The CA4 multiroom system makes enjoying your music throughout your home an affordable luxury.

The CA4-KP keypad selects between four available sources and adjusts bass, treble and loudness.
The keypad also sets source grouping, all on, all off, and party mode.

Featuring green backlighting, an IR receiver and IR confirmation through an LED status indicator, the keypad includes white and almond trim plates and fits in any Decora plate.

Two CA4 controllers can be connected, easily expanding to eight zones for larger homes or budgets.

the CA4-RC remote controler, includes extensive IR device codes and learning capabilities, making control of the system as simple as pressing a button.

With advanced features and easy to use controls, the new CA4 combines exceptional value and straightforward operation for a truly affordable multiroom audio experience.

Unity 200-Watt Bridgeable Power Amp

Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.

This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 100 watts per channel into 8-ohm loads or 125 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 225 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.

Features:
• Class-D amplifier providing 100 watts/channel (RMS) into 8 ohm loads or 125 watts/channel into 4-ohm loads
• Bridgeable output provides 225 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connection additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side

Unity 100-Watt Bridgeable Power Amp

Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.

This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 50 watts per channel into 8-ohm loads or 65 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 120 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.

Features:
• Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads
• Bridgeable output provides 120 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connecting additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side

Designed to integrate with TVs and displays and provide enhanced audio, 35W per channel at 4 Ohms, mounts behind TV or in structured wiring enclosure, 24 bit / 96 kHz SPDIF, optical and analog line level inputs, IR sensor input, on board IR learning, integrated subwoofer output.

A factory refurbished deal on a powerful multi-channel amplifier Here’s a chance to save a little bit on a versatile amp that might just be able to power all the speakers in your custom-installed multi-room audio system. With eight channels of power, the Russound D850 can deliver clear stereo sound into four separate rooms. Or you can combine two channels into one to give your speakers more juice – a great option for power-hungry outdoor speakers. And unlike traditional amps that run hot and waste a lot of energy, the D850 boasts a high-efficiency Class D amplifier design for cool operation, reduced weight, and clean, undistorted sound. You even get a full two-year manufacturer’s warranty. More flexible options for enjoying music throughout your home The D850 can distribute music from one audio source, such as a networked music streamer, to multiple rooms in your home. Or you can connect up to four separate sources and play a different one in each listening room. Each of the amplifier’s playback “zones” features independent left- and right-channel gain controls so you can adjust its output to fine-tune the levels of each speaker in your system. For music playback in more than four rooms, you can daisy-chain multiple Russound amplifiers together.

The SPW-8 is a stereo (two channel), one input, eight output, broad frequency response, volume control distribution hub. It provides a simple solution in complex speaker installations providing an easy way to connect from two to eight volume controls and pairs of stereo speakers to a single stereo receiver/amplifier. All outputs are labeled easing both connection and troubleshooting of a system

Specifications

• Power handling: 150 watts RMS per channel (suitable for use with 300 watt per channel rated receivers/amplifiers)
• Frequency Response: 20 Hz – 22kHz (+0dB, -0dB)
• Wire size acceptance: 2 or 4 conductor, stranded, 16 AWG to 14 AWG
• Dimensions: L 3.40 in. x W 1.70 in. x H 7.00 in
• Maximum Number of Volume Control/Speaker
• Connections: 8 pairs
• Must be used with impedance matching volume controls

The award-winning and sophisticated CAV6.6 is a star performer. It works behind the scenes to distribute six audio-video sources to six rooms in your home. It’s like having an entertainment system in each room.

126W (42W RMS), easy access impedance switch behind front plate, Decora style plate and knob (detachable), 12 gauge max wire Size, 4 ohms minimum, 12 steps of volume including off, Autoformer based impedance matching, includes white and light almond plates and knobs.